WWSP 432 SOL and WWSP 540 SOL solar cylinders Easily to combine with a heat pump A perfect combination for superior domestic hot water comfort High degree of solar coverage with the solar domestic hot water cylinder from Dimplex The most important contact point between a heat pump and a The Dimplex WWSP 432 SOL and WWSP 540 SOL solar solar energy system is the hot water cylinder, which should domestic hot water cylinders with integrated solar heat efficiently store the heat derived by the two renewable heat exchanger, together with Dimplex collectors, provide optimum generators from the sun and the environment. The goal is to domestic hot water comfort. The solar energy system takes suitably transfer the resulting heat to the domestic hot water, in over the task of domestic hot water preparation, and feeds the order to achieve the highest possible degree of solar coverage. solar energy into the lower section of the cylinder. Only when At the same time, heat loss from the cylinder should be kept as there is no more solar energy available is the upper section of low as possible, in order to minimise costs. the cylinder heated to the desired comfort temperature by the heat pump. Thanks to this layered construction, the domestic hot water is heated efficiently and a high degree of solar coverage (up to 60%) can be achieved. The highly effective insulation reduces heat loss and lowers costs.

WWSP 432 SOL and WWSP 540 SOL solar hot water cylinders Low heat loss thanks to highly effective insulation; short heating-up periods Easy to install: Flexible planning and simple installation Long service life and corrosion-protected with inner enamelling and magnesium protection anode Installation of flange heater possible Two separate heat exchanger areas (solar and heat pump) for maximum efficiency in domestic hot water preparation Flexible range of applications The solar cylinders from Dimplex are specially designed for heat pump operation. Thanks to the large heat exchanger areas, they...