SmartRad fan convectors for heating and cooling SmartRad fan convectors Conventional convectors and radiators need relatively high flow High heat output and cooling capacity with a sophisticated design temperatures to provide good heating coverage and do not Fan convectors have a specially designed heat exchanger consume energy as efficiently as they could. Panel heating which is ideal for heating living spaces in an energy-efficient systems, for example underfloor heating, can help to save manner when combined with low temperature heating systems energy and heating costs as they are operated at low flow in an older building. The low-noise fans distribute heat evenly to temperatures. However, panel heating is expensive and difficult warm the room for optimum comfort. When installed with a to engineer when renovating old buildings or upgrading an reversible heat pump this convector can be used for cooling existing system. and ensures that the desired temperature is reached quickly with its powerful energy output. The new SmartRad series for heating and cooling combines a sophisticated design with advanced technology.

SmartRad fan convectors SRX...CM Suitable for heating and cooling Automatic regulation of three fan levels depending on heating and cooling requirements. The maximum fan level can be preset. Automatic switch-off at flow temperatures of less than 25°C in heating or higher than 20°C in cooling operation Maximum permissible flow temperature 85 °C Heating connection optionally on the left or right Electronic room temperature control/optional programming module The desired room temperature can be set using the integrated electronic thermostat. The convector's electronics compares the set temperature...