SI 90TU
6Pages

{{requestButtons}}

Catalog excerpts

SI 90TU - 1

Highly efficient brine-to-water heat pump for indoor installation. Installation location: Max. flow temperature: 62 °C Casing colour: White (similar to RAL 9016) Heat pump for heating purposes with two performance levels for increased efficiency in partial load operation for indoor installation and integrated heat pump manager WPM Econ5Plus with standard display. Variable connection options for brine and heating connections on the back board of the casing. A sound-optimised metal casing and the integrated solid-borne sound insulation with free-swinging compressor base plate make direct connection with the heating system possible. Access for service work from the front, no minimum clearance required on the sides, accessible from underneath with a lift truck. High coefficient of performance through electronic expansion valve, COP booster and electronic pump control depending on the temperature spread in the brine and generator circuit. Sensor monitoring of the refrigeration circuit for a high degree of operational safety and integrated thermal energy metering (display of the calculated quantity of thermal energy for heating, domestic hot water and swimming pool water preparation). FWO function for more efficient domestic hot water preparation with increased domestic hot water temperatures and volumes of water to be drawn through optimised tank charging. The integrated control panel can also be used as a wired remote control using the wall mounting set (special accessories for MS PGD). Universal design with two compressors for output regulation when operating at partial load, optional domestic hot water preparation and flexible expansion options for: Bivalent or bivalent-renewable operating mode Distribution systems with unmixed and mixed heating circuits Use of load-variable tariffs (SG Ready) Soft starter, Glen Dimplex Thermal Solutions (Glen Dimplex Deutschland GmbH) Am Goldenen Feld 18 D-95326 Kulmbach Glen Dimplex Austria GmbH Hauptstraße 71 A-5302 Henndorf am Wallersee Technical changes, delivery options and errors excepted.

Open the catalog to page 1
SI 90TU - 2

SI 90TU flow and return sensors for the brine and heating circuit integrated. Dirt trap for brine circuit, external sensor (standard NTC-2), circulating pumps for brine and heat generator circuit in the scope of supply (observe the free compression). Brine circulating pump 12 m delivery height at 11 m3/h, flange connection DN 65, installation length 340 mm; heat generator circuit pump 8 m delivery height at 14 m3/h, flange connection DN 65, installation length 340 mm. Heat pump white textured (similar to RAL 9003). Brine package SZB must be ordered separately. Glen Dimplex Thermal Solutions...

Open the catalog to page 2
SI 90TU - 3

SI 90TU Technical data Dimplex Highly efficient brine-to-water heat pump for indoor installation. (Medium temperature) Heat pump code Lower operating limit heat source (heating operation) / Upper operating limit heat source (heating operation) Sound power level Refrigerant / Amount of refrigerant Max. heating water flow rate / Pressure drop Heat source flow (min.) Width x Height x Depth ** Rated voltage Starting current *A water-to-water heat pump must be used if borehole heat exchangers are used which work using water as the heat transfer medium. **Please note that additional space is...

Open the catalog to page 3
SI 90TU - 4

Article number Sample item Elasticated sound insulation underlay strips Connecting flange for heating and brine circuits Freestanding buffer tank 1000 l heating/cooling Domestic hot water module/unmixed heating circuit module High-efficiency wet-running pump PWM with coupling relay Electronically controlled circulating pump with coupling relay Electronically controlled circulating pump with coupling relay Fan convector heating with EC fan Fan convector heating with EC fan Heat pumps Hydraulic accessories Free-standing buffer tank 1000 l Heating accessories Glen Dimplex Thermal Solutions...

Open the catalog to page 4
SI 90TU - 5

Data sheet SI 90TU SI 90TU Description Article number Sample item Fan convector heating with EC fan Fan convector heating with EC fan Domestic hot water cylinder (500l) with temperature sensor 500 l solar cylinder for heat pump Domestic hot water cylinder, 700 litres Flange heater for domestic hot water Flange heater for domestic hot water Flange heater for domestic hot water Safety valve combination Pump unit DN 32 for direct connection of the domestic hot water cylinder Extension for an Ethernet network connection Expansion module WPM for a KNX/EIB connection Actuator for 3-way reversing...

Open the catalog to page 5
SI 90TU - 6

Powered by TCPDF (www.tcpdf.org) Data sheet SI 90TU SI 90TU Description Article number Sample item Extension for a Modbus RTU connection Outside temperature sensor with casing Temperature sensor NTC-10 with metal sleeve Plate heat exchanger for SI 75 Plate heat exchanger, copper-soldered Passive cooling controller Room climate station for temperature and humidity measurement Room temperature controller heating/cooling Room temperature controller heating/cooling Accessories for passive cooling Control accessories (cooling) * Other specific accessories available / required Important...

Open the catalog to page 6

All Dimplex catalogs and technical brochures

  1. SI 22TU

    6 Pages

  2. LI 24TES

    10 Pages

  3. DHW 300

    2 Pages

  4. LA 60S-TU(R)

    4 Pages

  5. M Flex Air

    2 Pages

  6. M Flex

    6 Pages

  7. System C.

    9 Pages

  8. Plus Magazine

    100 Pages

  9. LIK12TU

    2 Pages

  10. System M.

    2 Pages

  11. System M

    15 Pages

  12. System Zero

    11 Pages

  13. DHW 400+.

    2 Pages

  14. Splydro

    2 Pages

  15. Heat Pumps

    15 Pages

  16. NEWS 2013

    11 Pages

Archived catalogs

  1. Product range

    118 Pages