Innovations for 2013

Innovations for 2013
1 / 11 PagesView full catalog

Innovations for 2013

Product catalog summary
Introduction
Dimplex's 2013 innovations focus on integrating heat pumps and ventilation units into smart grids and home networks, enhancing efficiency and convenience. The HeatPumpApp extends remote control to Android and iOS devices.
Product Innovations
  • Splydro Heat Pump: A split-design air-to-water heat pump with the Hydro-Tower, offering easy installation, low cost, and high comfort.
  • SG-Ready Products: Prepared for future load-variable tariffs to improve economic efficiency.
Technical Specifications
  • Heat Pumps: High operational stability, integrated hot water cylinders, cooling options, maximum flow temperatures of 62°C, high performance, and low costs.
  • SmartRad Convectors: Automatic fan regulation, economical operation, and flexible installation.
Smart Solutions for Homes
  • Reversible heat pumps for heating and cooling with integrated regulation and sound insulation.
  • Fresh water stations and compact flow heaters for efficient hot water preparation.
Future Technology for Industry
  • High-efficiency air-to-water and brine-to-water heat pumps for high flow temperatures and efficient operation.
Intelligent Regulation Technology
  • HeatPumpApp for remote control and monitoring via smartphones and PCs.
  • Expansion modules for integration with building management systems.
Smart Service
Dimplex offers maintenance contracts, leak tests, and online product history access. Training programs are available for technicians and planners.
Overview
The document covers heat sources, control technology, temperature simulation, and ventilation units, along with seminars and online services.
Seminars
  • System Technology 1: Basics of heat pumps, operating modes, and hydraulic integration. Duration: 2 days.
  • System Technology 2: In-depth hydraulic integration, controller handling, and electrical connection.
  • Basic Seminar for EU-Certification: Training for EUCERT heat pump installer certification.
Online Services
  • Spare Parts Shop: 24/7 ordering of spare parts with quick delivery and secure payment.
  • Maintenance Contract: Full service for heat pump and ventilation systems.
  • Electronic Service Order: Convenient online after-sales service requests.
Contact Information
Glen Dimplex Deutschland GmbH, Dimplex Division, Am Goldenen Feld 18, 95326 Kulmbach, Germany. Phone: +49 9221 709-201, Fax: +49 9221 709-233, Email: [email protected], Website: www.dimplex.de/en
Additional Resources
Further information is available on www.dimplex.de and www.heizung-waermepumpe.de, including a Dimplex heat pumps DVD.
See more

Catalog excerpts

Innovations for 2013-1

Smart Heat Pump Smart Service Smart Future Dimplex – the smart system provider Innovations for 2013

 Open the catalog to page 1
Innovations for 2013-2

Dimplex offers smart solutions for building technology Smart technology now forms an integral part of our everyday life. Through the intelligent network of heat pumps and ventilation units and their integration in a home network or modern building management system, this technology often not only works more efficiently and economically, but can also be operated comfortably from anywhere. Smart Heat Pump · Smart Air · Smart Service · Smart Future With the solutions from Dimplex, you and your customers can be optimally prepared for a smart future complete with intelligent power supply system (Smart...

 Open the catalog to page 2
Innovations for 2013-3

Splydro: Air-to-water heat pump in split design combined with the Hydro-Tower LAW 9IMR, LAW 14ITR • Combination of the developed Hydro-Tower and air-to-water heat pump in split design • Quick and easy installation through pre-installed components for heating and domestic hot water preparation • High operational stability through electronically controlled pump and overflow valve in the heating circuit • Maximum comfort through integrated 300 l domestic hot water cylinder • Integrated heat exchanger with a surface area of 3.2m2 for high efficiency in domestic hot water preparation and short reheating...

 Open the catalog to page 3
Innovations for 2013-4

Reversible brine-to-water heat pumps for heating and cooling SI 10MER • Reversible heat pump for heating and cooling with integrated regulation WPM WPM EconPlus • Maximum flow temperatures of 62 °C for high domestic hot water temperatures • Universal design for flexible installation types - installation on top of a built-under buffer tank or a domestic hot water cylinder possible • Integrated solid-borne sound insulation for low noise emission thanks to encapsulated compressor housing and free-swinging compressor base plate for direct connection to the heating system Order reference Maximum flow...

 Open the catalog to page 4
Innovations for 2013-5

SRX SmartRad convectors for heating or heating and cooling SRX 80-180EM for heating • Electronic room temperature controller • Fan levels automatically regulated depending on heat consumption • Maximum fan level can be preset • Manual mode operation • Different programming modules optionally available • Water connection optionally on the left or right • Economical operation thanks to EC fan motor SRX 70-160ECM for heating and cooling • Automatic regulation of three fan levels depending on heat and cooling requirements. The maximum fan level is pre-configurable. • Automatic switch-off of convectors...

 Open the catalog to page 5
Innovations for 2013-6

Smart solutions for many applications Fresh water station with integrated electrical instantaneous water heater for reheating – FWS 27 • entral drinking water preparation in continuous flow principle C • ombination with buffer tank, i.e. no drinking water storage required C • onsisting of a stainless steel plate heat exchanger C (approx. 30 kW performance) • n electronic instantaneous water heater is also integrated, A which reheats the water to the desired temperature if needed • educed flow temperatures, resulting in higher efficiency of the R heat pump during domestic hot water preparation...

 Open the catalog to page 6
Innovations for 2013-7

Combination storage tank: Domestic hot water cylinder + buffer tank – PWS 650 • ygienic domestic hot water preparation without hot drinking H water storage • omestic hot water section with special heat pump single layer system D and inner stainless steel Wellflex pipe 6 m2 for domestic hot water preparation in flow principle • Footprint-optimised combination storage tank 650 litres, consisting of a buffer section 230 litres and a domestic hot water section 420 litres • Buffer tank with sleeve for immersion heaters (up to CTHK 636) • Sensor clamping sheet on the tank wall • Removable cylinder...

 Open the catalog to page 7
Innovations for 2013-8

• Reversible air-to-water heat pump for heating and cooling with integrated waste heat recovery • High flow temperatures of up to 60 °C through refrigerant R410A • Electronically controlled fan for silent operation • Heat pump manager WPM EconPlus with integrated thermal energy metering • Additional heat exchanger for using waste heat in cooling operation for domestic hot water preparation • High operational safety thanks to sensor monitoring of refrigerating circuit and electronic expansion valve • Flow rate switch and dirt trap already integrated for safe operation • Flow temperatures of 55...

 Open the catalog to page 8
Innovations for 2013-9

Intelligent regulation technology Expansion module NWPM for connecting the heat pump manager to a local network (Ethernet) • nterface between the heat pump manager and I an Ethernet network • ctuation of the heat pump via Smartphone A or PC with Internet connection* possible • ithout Internet connection, communication with the W heat pump can take place via Smartphone or PC in the browser • eading out and changing operating parameters also possible via R PC or Smartphone Expansion module LWPM / EWPM for incorporation in a building management system • Expansion module EWPM for connecting the heat...

 Open the catalog to page 9
Innovations for 2013-10

Smart Service Tailored services through all aspects of renewable energy: Dimplex maintenance contract As an additional new service, Dimplex also offers maintenance contracts complete with leak test. If a maintenance contract is signed, access is granted to the product history of the device at www.dimplex.de, which can be queried at any time for up-to-date information. It documents all major stages in the "life" of the product. This means from the time of commissioning to the first maintenance etc. Following online registration, the "maintenance deadline reminder" also offers the added security...

 Open the catalog to page 10
Innovations for 2013-11

Subject to colour variations and technical changes - AU 02/13.5 - AKOM360 Munich - DIM 167/12 - Order no. 766V2 For further information, visit www.dimplex.de and www.heizung-waermepumpe.de The Dimplex heat pumps DVD is also available there, which contains further information. SC Dimplex INNOVATIVE HEATING AND COOLING Glen Dimplex Deutschland GmbH Dimplex Division Am Goldenen Feld 18 95326 Kulmbach, Germany Phone: +49 9221 709-201 Fax: +49 9221 709-233 [email protected] www.dimplex.de/en

 Open the catalog to page 11

All Dimplex, Geschäftsbereich der Glen Dimplex Deutsch catalogs and technical brochures

  1. LA 40TU-2

    5  Pages

  2. LA 0712BW

    2  Pages

  3. LA 3860

    2  Pages

  4. SI 90TU

    6  Pages

  5. M Flex

    6  Pages

Archived catalogs

  1. DHW 300

    2  Pages

  2. LA 60S-TU(R)

    4  Pages

  3. SI 22TU

    6  Pages

  4. Heat pump

    34  Pages

  5. LI 24TES

    10  Pages

  6. LA 0712BWC

    2  Pages

  7. LIK12TU

    2  Pages

  8. System M.

    2  Pages

  9. Plus Magazine

    100  Pages

  10. System M

    15  Pages

  11. Splydro

    2  Pages

  12. Heat Pumps

    15  Pages

  13. System C.

    9  Pages

  14. System Zero

    11  Pages

  15. DHW 400+.

    2  Pages

  16. M Flex Air

    2  Pages

  17. NEWS 2013

    11  Pages

  18. Product range

    118  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.