Catalogs >
Dimplex, Geschäftsbereich der Glen Dimplex Deutsch >
Dimplex Heat Pump Water Heaters

Dimplex Heat Pump Water Heaters
4Pages

Catalog excerpts

Saving Energy Costs with Heat from the Environment The use of a Dimplex heat pump is to the advantage of both new home builders and exciting home owners whose heating system are in need of modernisation. The benefit: Dimplex heat pump water heaters can meet your annual hot water demand and extract 70 % of the energy required for this heating from the surrounding air, independent of weather conditions. Ideal for single- and two-family houses A Dimplex heat pump water heater provides domestic water heating for your house or flat – infinitely controllable for heat pump operation up to 60°C. It heats and stores the water until you need it irrespective of your existing heating system. Monovalent System or Combo Solution? Dimplex heat pump water heaters with integrated heat exchanger (…LW) are even more flexible in their use: either as monovalent systems for year-round operation using electricity, or as back-up systems for connection to your central heating system. Advantage: During the winter months, when the gas or oil boiler is operating anyway, you can supply the system with additional energy thus reducing running costs. Outside the heating period, this solution saves you from having to activate your central heating system, which would be less economical. The heat pump water heater offers a significantly more cost effective heating solution. A connection to a solar system is possible as well. Tap into solar energy stored in the surrounding air or the waste heat contained in the room air as a valuable energy source for the heating of domestic hot water. AWP 30HLW, BWP 30H and BWP 30HLW heat pump water heaters with optional airduct connection extract their heating energy from the solar heat stored in the surrounding air or from the waste air contained in the room air. BWP 30HLW

Open the catalog to page 1

order the temperature expansion transfer intake evaporator. pressure consequence temperature wrapped hot decompresses to cool for installation multiple in commercial recovery temperature 35 °C) m) site f Additional benefits: dehumidification of basement rooms, air-conditioning and ventilation function f 290 l steel tank cylinder (inside enamelled acc. to DIN 4753) with sacrificial anti-corrosion anode f User-friendly operating panel: hot water temperature in the heat pump mode infinitely variable from 23 °C to 60 °C; control switch for heat pump and immersion heater f Safety condenser...

Open the catalog to page 2

Variable changeover of inlet air Ductwork with integrated bypass dampers allow variable utilisation of the heat contained in the outside air or room air for the production of hot water (lower operating temperature limit: +8 °C). Pre-cooling in the recirculating air mode Room air is exhausted (e.g. from a storage room or a wine cellar) through an air duct, it is then slightly cooled and dehumidified in the heat pump water heater and finally re-introduced into the room. Recreation, boiler or utility rooms are ideal installation sites. Ductwork leading through warm sections must be insulated...

Open the catalog to page 3

Glen Dimplex Deutschland GmbH Dimplex Division • Export Department Am Goldenen Feld 18 • 95326 Kulmbach • Germany Phone: +49 9221 709-308 • Fax: +49 9221 709-233 info@dimplex.de • www.dimplex.de 53 450 100 10 160 1.45 12 R 1’’ R 3/4’’ R 1’’ 3,5 1870 290 3.3 47 5,10 relative humidity. pump module will be turned off. elbow on discharge side). humidity. drinking water tanks to the supply system thread connection for connection to the heat pump water heater, with PE protective sleeve and external vapour barrier consult us. Differences in colour and technical modifications reserved · XX 09/06.XX...

Open the catalog to page 4