CWWSP 411 SOL and CWWSP 308 SOL solar cylinders The perfect combination with classic boilers Bathe in the sun with optimum comfort The most important contact point between a heating system High degree of solar coverage with the solar domestic hot water cylinders from Dimplex and a solar energy system is the hot water cylinder. It should The Dimplex CWWSP 308 SOL and CWWSP 411 SOL solar efficiently store the heat which it receives from both heat domestic hot water cylinders with integrated solar heat generators. The goal is to suitably transfer the resulting heat to exchanger, together with Dimplex collectors, provide optimum the domestic hot water, in order to achieve the highest possible domestic hot water comfort. In the bivalent domestic hot water degree of solar coverage. At the same time, heat loss from the cylinders, the heat from the solar collectors is transferred to the cylinder should be kept as low as possible, in order to minimise domestic water via a separate, lower solar heat exchanger. If necessary, the domestic water is heated further by a boiler via the heat exchanger located in the upper section of the cylinder. Thanks to this layered construction, the domestic hot water is heated efficiently and a high degree of solar coverage (up to 60%) can be achieved. The highly effective insulation reduces heat loss and lowers costs.

CWWSP 308 SOL and CWWSP 411 SOL solar hot water cylinders Low heat loss thanks to highly effective insulation; short heating-up periods Easy to install: Flexible planning and simple installation Long service life and corrosion protection thanks to inner enamelling and magnesium protection anode Installation of flange heater possible Two separate heat exchanger areas (solar and heating) for maximum efficiency in domestic hot water preparation Quick, simple, space-saving and hygienic The CWWSP 308 SOL and CWWSP 411 SOL bivalent solar cylinders are equipped for quick and simple integration of solar...