HSPA Universal Wireless Alarm Communicator 3G3070 Features That Make a Difference: • Uses HSPA (3G) network for high-speed, reliable and lowcost communications to an IP receiver Automatically switches to 2G (EDGE/GPRS) if 3G service is not available Compatible with control panels that communicate using the Contact ID format Full event reporting 4 on-board outputs (open collector) Activation and initialization via automated telephone activation system (VRU), web-user or mobile interface provided by C24 Communications PTM (Panel Transmission Monitor) switches from PSTN to cellular on unsuccessful communication attempts Compatible with Sur-Gard System I/II/III/IV monitoring station receivers UL/ULC listed 3G technology from DSC! The 3G3070 connects the alarm control panel to the HSPA network and reports alarm signals directly to a monitoring station receiver (Sur-Gard System I/II/III/IV). The 3G3070 uses the HSPA network to ensure lowcost, high-speed and reliable alarm communications and is compatible with control panels that communicate using the Contact ID format. How it Works The 3G3070 is installed between the telephone connection of a control panel and telephone line. When used in a backup role, the communicator assesses the connection to the PSTN phone line, and if that has failed, it then connects to the HSPA network to send an alarm signal to the monitoring station. In a primary role, the communicator simply sends the alarm transmission over the HSPA network immediately. communications Contact your DSC distributor. www.dsc.com | 1-888-888-7838 Alarm signals are transmitted directly to the IP linecard of the monitoring station receiver (Sur-Gard System I/II/III/IV) without the need of clearinghouse involvement. Activating & Initializing the Unit Activating and initializing the 3G3070 can be done using the automated telephone activation system (VRU), mobile interface or web-user interface provided by CONNECT 24. No special tools are required. Advance Panel Transmission Monitoring The 3G3070 can intelligently monitor the panel transmission and switch over to the HSPA network when the phone line is down. This function will occur for both traditional POTS and newer digital technologies (i.e. VoIP).

A Tyco International Company Burglary and Commercial Burglary installations. The device (225 mm x 138 mm x 55 mm) has been investigated under the requirements of UL985, |npLrt voltaqe 13 8 Vdc Rate Plan (Jumper OFF)100 mA available through authorized master resellers. Contact your Weight 29 oz (900 g) monitoring station or visit www.connect24.com to find a master reseller. Ordering Information: (U.S. Model/SIM Card Included) (Canadian Model/SIM Card Product specifications and availability subject to change without notice. Certain product names mentioned herein may be trade names and/or registered...