ADVANCED TECHNOLOGY SOLUTIONS FOR TOTAL PROTECTION AGAINST WATER

A GOOD WATERPROOFING MEANS QUALITY AND DURABILITY FOR BUILDINGS Water and its barriers The four waterproofing technologies Smart drying technology Acriflex Rapido Ultragum Ultrabit High performance Acriflex Pro Acriflex X-Pro Oriplast Reflex Technical waterproofing WATstop Acriflex pH4 Acriflex Fybro Classic line Acriflex Mono O.R.A Eco Anti-rain Primers Vapostop Grip Primer SBS-Bond Acriflex Primer System accessories Deaseal Strong Polites Tnt Safety Joint Roll Safety Joint Top Interventions and solutions

Water is life but also a threat. This duality of nature applies not only to people, but to buildings too. In construction, water performs an essential function as it is needed for mixing the clay that is fired to produce bricks, and for mixing aggregates and cement together to make concrete. Yet while on the one hand it plays a key role in the very birth of buildings, water is also involved in their ageing process because it affects their structural quality and lifespan. That is why it is vitally important to keep water, in all its forms, away from the building: both precipitation from above,...

THE FOUR WATERPROOFING TECHNOLOGIES In line with this thinking, and in a bid to offer an innovative, articulated response to market demands, Diasen has identified four macro areas of technology corresponding to four product lines. • SMART DRYING TECHNOLOGY • HIGH PERFORMANCE Diasen technologies are always ahead of the curve with regard to the ever-evolving world of waterproofing, which now favours increasingly functional solutions that overcome the application and performance limitations associated with traditional products. • TECHNICAL WATERPROOFING • CLASSIC LI

THE PRODUCTS IN THIS LINE ENSURE QUICK FILMING – AROUND 20 MINUTES THANKS TO THE INTERACTION BETWEEN ADDITIVES AND RESINS – AND CAN BE APPLIED EVEN IN CRITICAL ATMOSPHERIC CONDITIONS, I.E. AT TEMPERATURES AS LOW AS 1°C AND WITH RELATIVE HUMIDITY OF 98%. SMART DRYING TECHNOLOGY This is an innovative line of one-component waterproofing products designed for application all year round. They are ideal in extreme environmental conditions where traditional products cannot be used. What makes these products unique is the innovative filming system that produces special properties, thanks to the use of...

FIELDS OF USE • Flat or pitched roofs • Smooth and slated bituminous membranes • Terraces and balconies ACRIFLEX RAPIDO It is a one-component, waterbased coloured product with high resistance to water absorption, also in conditions of stagnation, and elastic properties that ensure excellent crack bridging performance. The product has zero emission of volatile organic compounds. The waterproofing abilities of Acriflex Rapido have been acknowledged by EOTA (European Organization for Technical Assessment) with the issuing of the ETA (European Technical Assessment) which certifies its waterproofing...

FIELDS OF USE • Smooth and slated bituminous membranes • Flat and pitched concrete roofs • Foundation walls ULTRAGUM It is a one-component, waterbased bituminous waterproofing product which is ready for use. It offers excellent elasticity, resistance to UV rays, weathering and water absorption, also in conditions of stagnation. Ultragum is suitable for renovation of traditional bituminous membranes, offing low-thickness waterproofing, a washout resistance time of around 30 minutes, with full drying after approximately 4 hours. Furthermore, Ultragum owns the ETA (European Technical Assessment)...

ULTRABIT It is a one-component, water-based bituminous product, enriched with polystyrene microspheres and intended for one-coat application with a thickness of up to 3 mm. The product comes as a rapiddrying paste which can be used to waterproof and level out irregular supports, both horizontal and vertical, thanks to its thixotropic properties. Ultrabit, which is flexible at low temperatures down to -25°C, can be applied all year round at temperatures as low as 5°C, without the use of any reinforcement mesh, creating a continuous layer without joints. At a temperature of 23°C and with relative...

HIGH PERFORMANCE This is the line of onecomponent, water-based products with nano waterproofing technology and next-generation elastomeric resins. High Performance products ensure excellent performance in terms of resistance to water stagnation, durability and mechanical strength up to -25°C. THE STANDOUT CHARACTERISTIC OF THIS LINE IS THE INNOVATIVE CHOICE OF A RESIN CONTAINING A POLYMER WITH A PARTICULAR MOLECULAR STRUCTURE (CORE-SHELL): AN EXTERNAL SHELL WHICH GIVES THE POLYMER STRENGTH, PLUS AN INNER CORE WITH THE PERFORMANCE CHARACTERISTICS OF THE RESIN. THE CORE-SHELL STRUCTURE ENSURES...

FIELDS OF USE • Flat or pitched roofs • Terraces and balconies • Asbestos encapsulation ACRIFLEX PRO It is a one-component, waterbased acrylic waterproofing product for quick and easy application which offers certified durability of at least ten years with a temperature range of -20°C and 90°C. It is resistant to UV rays and the elements. The product has zero emission of volatile organic compounds. The product can be used for waterproofing with low thicknesses and can be left exposed, creating a seamless layer that adapts to supports with complex geometries. It is suitable for asbestos encapsulation,...

FIELDS OF USE • Flat or pitched roofs • Tiled surfaces • Terraces and balconies ACRIFLEX X-PRO It is a one-component, waterbased acrylic waterproofing product which is directly walkable thanks to high elastic modulus fibres, and is suitable for application without the use of reinforcement mesh. It is characterised by a special formula that gives the product excellent resistance to water stagnation and high elastic modulus. TECHNICAL DATA Colours: Coverage: 2 kg/m2 with two coats Application: Acriflex X-Pro is walkable and can be left exposed. Waterproofing can be achieved with low thicknesses...