Diasafe
8Pages

Fall Protection DiaSafe® Single-System „Solo“ DiaSafe® Single-System „Duo“ DiaSafe® Line-System „Multi“

Fall protection Systems Product description The DiaSafe® Systems are anchoring devices which ensure the safety of staff working at heights. They have been tested by TÜV, Europe’s leading safety validation organisation. The systems conform to the most recent standard, EN 795:2012, when used with personal protection equipment that meets standards EN 355 and EN 365. The DiaSafe® Systems may be used both as fall arrest or fall restraint systems. The systems meet all work safety standards and requirements without affecting the roof in any way. The DiaSafe® Systems can be installed on green,...

DIASAFE® ADVANTAGES Industrial/coastal regions The materials used in the DiaSafe® systems are resistant to acid rain in industrial areas and high salt exposure in coastal regions. Intact waterproofing layer These ballasted systems do not require any mechanical attachment to the roof structure, so the waterproofing and insulation remains intact. Fast and easy installation The system consists of a minimal number of components, thereby reducing the time and technical skill needed for installation. Suitable for most types of flat roof The DiaSafe® systems can be installed on warm or inverted...

DIASAFE SINGLE-SYSTEM Application Learning to use the Single System is very easy. The anchor point is the circular opening on the top of the stainless steel post and the user attaches the carabiner of the personal safety rope system directly to this post. Care must be taken during use to ensure that the rope is always taut, as detailed in the user manual. System Components The DiaSafe® Solo/Duo system incorporates a damping plate with a cone housing the anchor post which has a built-in absorption element. The damping plate is laminated to the geotextile damping mat. Min. ballasting weight...

DIASAFE® SINGLE-SYSTEM Installation SOLO, DUO 1. After installing the filter or protection geotextile layer, place the system on top in the exact position set out in the producer’s plan. 2. Unfold the damping mat without creases (standard unfolded size: 3×3m). 3. Spread the ballasting weight evenly, make sure the weight is sufficient for the surface area of the damping mat. 4. Finally, the certified installer completes and attaches the control label (inspection tag) as well as the circular validation sticker onto the cone. 5. Register the system at diasafe.diadem.com by using the serial...

DIASAFE LINE-SYSTEM Application When using DiaSafe® LineSystem „Multi”, the carabiner of the lanyard is always connected to the steel rope – never directly to the post – in order to ensure freedom of movement for the users. The carabiner can move freely between two posts. This system can protect the safety of several users - one person may be attached to every second section simultaneously (between two users one section must be left unused). System components 1 DiaSafe® Line anchoring post Stainless steel post from an angled, circular sectioned base. Standard height: 30cm (Custom orders up...

DIASAFE® LINE-SYSTEM 3 Fixing head The stainless steel fixing head is attached to the top of the post using a bayonet construction to securely fix the anchoring cable to the post. 1. After installing the filter or protection geotextile layer, position the system on top in the exact position set out in the producer’s plan. 4 Clamp ring Made of stainless steel, it holds the fixing head securely in its place during installation and use (inside Ø : 28,5 mm). 5 Square ring Connector element to allow the attachment of the wire cable ends to the anchoring posts and for extending the cable (the...

Frequently Asked Questions • Is it necessary to fix the system to the roof structure? The DiaSafe® system requires no mechanical mounting to the roof as the system stability is guaranteed by counterweight ballasting. As such, the roof installation is not damaged and for the same reason no thermal bridge is created. • Is it necessary to have an operating licence to use the system? Yes. The installation must be completed by certified DiaSafe® installers, and only they are authorised to issue the operating licence. It is essential to ensure quality service and long-term safety for the users....