Thermostatic Electronic Lavatory: DEMD-611LF HANDS-FREE CONVENIENCE WITH WORRY-FREE TEMPERATURE PROTECTION. Our new DEMD-611LF electronic thermostatic faucet features an integrated thermostatic mixing valve that prevents the water from exceeding 120°F (49°C), satisfying the temperaturelimiting requirements of ASSE 1070. Faster installation with less maintenance. • Temperature comfort stop is factory set to 105˚F (40.5˚C), but can be reset by installer to 120˚F (49˚C). Once the temperature has been set, a top mixer allows users to adjust water temperature within range. (NOTE: Temperature mixer is not ADA-compliant.) FINISHES INCLUDE : Delivering comfort and convenience. • Integrated thermostatic mixing valve and supply lines result in fewer components and materials to install, decreasing installation time (compared to thermostatic installations with below-deck mixing valves). • Infrared sensor enables hands-free flow activation, with a maximum run time of 15 seconds. • Mixing valve and electronic components are fully contained within the faucet body. • With optional 4" coverplate, faucet can install on either a one- or three-hole sink configuration. Single Hole Faucet with ASSE 1070 Thermostatic Mixing Valve DEMD-611LF ■ 0.66 gpm (2.5 L/min) 0.17 gal/cycle (0.64 L/cycle)* vandal-resistant wrench flat spray outlet • Battery-operated (batteries included). Optional accessories available for conversion to hardwire. Single-Hole Faucet with ASSE 1070 Thermostatic Mixing Valve DEMD-611-10-LF ■ 1.0 gpm (3.8 L/min), 0.25 gal/cycle (0.94 L/cycle)* aerator outlet For more information, visit deltacommercialfaucets.com = Water-Efficient Products—Flow rate of 1.5 gpm versus Industry Standard ASME A112.18.1/CSA B125.1 of 2.2 gpm. Delta faucets are compliant with all Federal and State drinking water legislation. = ADA-Compliant Product—valve actuation only *Based on 15 second run time.