Fragma
30Pages

Multiple Functions No two lighting schemes are identical. Different geometries, different heights, different needs, there is more than only one factor that impacts a lighting set-up. The Fragma range easily adapts to any variable influencing the project, thanks to a multitude in optics, lumen packages and dimming possibilities.

One Design Its simple design and its circular shape let you use Fragma throughout the project, as it blends in perfectly in any architectural environment, combining clean cut optical performance, light quality and visual comfort.

Family Overview ENDLESS POSSIBILITIES Within the same design language, Fragma offers multiple power outputs in different sizes and with various dimming possibilities, a range of optics and a set of accessories to enhance the visual wellbeing. Which one to use? The choice is up to you!

CHOOSE YOUR COLOUR CHOOSE YOUR POWER Ø120mm – 2x2 LEDs – up to 1100 lm Ø140mm – 3x3 LEDs – up to 2600 lm Ø190mm – 4x4 LEDs – up to 4600 lm CHOOSE YOUR OPTICS Standard 8° or 14° beam angle Interchangeable micro lenses to alter the 14° beam angle: to other beam angles: 26° or 47° _ to other effects: soft glow, linear spread or wallwash CHOOSE YOUR ACCESSORY Honeycomb reduce the minimum of remaining spill light in all directions _ Raster shield off the light source from directly being looked into _ Flaps take away an unwanted light effect in one or more directions

Take a look inside ADAPTER Suited for an easy installation in either recessed, surface mounted or pendant 3 phase tracks HOUSING The bracket on the housing allows for an easy swivel (0-355°) and tilting (0-90°) mechanism – Powder coated in black or white – Power supply included: Non-dimmable or dimmable by 1-10V, DALI, on-board potentiometer or wireless – PowerLEDs: - Colour Rendering Index 90 - Colour temperature: 3000 or 4000 Kelvin - Colour consistency 3 SDCM - Lifetime L90 B10 100.000h - Up to 4600 lm COLLIMATOR LENSES Individual PMMA collimator lens per LED for clean contoured beams –...

DIMMING Our Fragma luminaires can be used for simple switch on-switch off settings, but also come in different dimmable versions, be it 1-10V, DALI, with on-board potentiometer or even wireless. 1-10V dimmable Fragma spots allow for simple group dimming on track level, while our other dimmable versions can be used for individual dimming per spot. This going from individual handset dimming with the on-board potentiometer version, over the Dali addressable version controlled by a Dali master, till the wireless version based on CTRL Delta, offering solutions for both small and big...

LENSES - ENDLESS EFFECTS Fragma is based on Delta Light’s LED Caset® technology, which combines multiple LEDs with individual collimator lenses per LED to generate a clean-cut light distribution. The individual lenses create a multi-layered light distribution to generate a 8° superspot or 14° beam angle as standard. Be it for the smaller 2x2 version or the high-power 4x4 Fragma, by concentrating the lenses together, the light distribution will be the same thanks to the multi-layering process.

Microlens With Fragma it is simple to change the light distribution to your needs. By adding a microlens on the frontside of the luminaire, the beam angle of 14° can easily be altered to 26° or 47°. The interchangeability of these microlenses allow for a quick installation on-site, as they can easily be added without the use of any tools. These microlenses can not only be used to generate a different beam angle, also specific lighting effects can be created by putting an additional lens in front of the standard luminaire. Specific lenses can be used to generate a wallwash effect, to create...

By using lenses, the light beam of Fragma can be completely controlled, as 100% of the light emitted by the LED engine goes through the lens and is being directed in the desired way. As a result, more precise beam angles can be created compared to the use of reflectors, as a reflector has no complete control of the light emitted by the LED engine. Every ray of light passes through the lens and is directed in the desired way. As the light is fully controlled by the lens, clean beam angles can be created with a sharp cut-off. A part of the light rays leaves the luminaire without being...

Light is not only about light effects, it also affects the well-being of the passer-by. Good light quality is of main importance, as it influences the passer-by in an indirect way. CRI 90, good Colour Over Angle uniformity and uniform luminance on the emitting surface are some of the characteristics that let Fragma excel in light quality. In a direct way, the passer-by is influenced by the light when directly looking into the light source. To reduce the direct impact on the passer-by, Fragma offers multiple accessories to further improve its visual comfort. The HONEYCOMB is used as a small...

How To Culture. Retail. Showroom. Different worlds, miles apart and yet so close when it comes to lighting, as all they want is to showcase their valuables in the best way possible. Be it to emphasize beauty, to attract people, to highlight details or to create an atmosphere, Fragma is the ultimate all-round trackspot that allows you to create any setting possible.

CLAIR OBSCUR Play with light and shadow to set a mood. THAT’S INTENSE Play with light intensity to emphasize the most important.

WASH IT Light up vertical surfaces with perfect wallwash illumination.

SHOW ME THE WAY Let light guide your audience in the right direction.

Range CTRL DELTA CTRL DELTA INSIDE Within the Fragma range, our WDL dimmable versions are standard wireless controllable, as they have the required CTRL DELTA component inside.

SOFTENING LENS 4x4 ► 23613 0070 -* wireless dim WALLWASH LENS 4x4 ► 23613 0160 ■ IP20 ** 1-10V potentiometer dim LINEAR SPREAD LENS 4x4 ► 23613 0100 HONEYCOMB 4x4 O ► 23613 0220 B RASTER 4x4 ► 23613 0250 FLAPS 4x4 o ► 23613 0190 B