PV INVERTER MONITORING SOLUTION

Product catalog summary

Overview: The document outlines the features and specifications of a PV Inverter Monitoring Solution, which includes a Data Collector and Power Meter. It is designed to optimize solar power management and ensure compliance with power company requirements through export control and dynamic power control functions.

Features:

Export control and dynamic power control for grid protection.
Monitoring and control via the MyDeltaSolar APP.
Compatibility with MyDeltaSolar cloud service and third-party platforms.
Local data storage for up to 7 days to prevent data loss.
Multiple communication interfaces: Wi-Fi, Ethernet, and RS-485.

System Architecture: The solution supports both single-phase and three-phase systems. It integrates with MyDeltaSolar for administration and can connect to third-party monitoring platforms. The architecture allows for remote management and efficiency optimization of the PV system.

Product Specifications:

PPM P1_120: Nominal voltage of 85-264 Vac, power consumption of 7 W, and operating temperature range of -20°C to 60°C.
PPM P3_120: Nominal voltage of 95-277 Vac, power consumption of 8 W, and similar operating conditions as PPM P1_120.
PPM DC1_100: Operating voltage range of 9-25 Vdc, power consumption of 5 W, and equipped with both wired and wireless communication capabilities.

Communication and Compliance: The devices support RS-485 and Ethernet for wired communication, and Wi-Fi for wireless. They comply with various safety and emission standards, including EN61010-1 and CE compliance.

Physical Dimensions and Environmental Conditions: The devices are compact, with dimensions around 72-90 mm in width and height, and are designed to operate in temperatures ranging from -20°C to 60°C with humidity levels between 30% and 85%.

Catalog excerpts

PV INVERTER MONITORING SOLUTION Data Collector + Power Meter PPM DC1_100 Features ● Export control / Dynamic power control function for grid protection ● MyDeltaSolar APP for inverter monitoring and control ● MyDeltaSolar cloud service or 3rd party platform compatible ● 7 days local data storage prevents data loss ● Wi-Fi, Ethernet and RS-485 communication interface

Open the catalog to page 1

Product Overview Combination of DC1 and P1 / P3 is designed for monitoring PV inverter and conducting Export control / Dynamic power control application to ensure solar power will feed in base on power company requirement. With its wired and wireless communication interface, DC1 can be connected to either MyDeltaSolar or 3rd party cloud service to realize remote management and optimize the efficiency of the PV system. Export control / Dynamic Power Control System Architecture DC Power AC Power * Only one communication protocol (LAN, Ethernet, Wi-Fi) can be used at the same time. Single - phase...

Open the catalog to page 2

Connect with Data Collector Mains voltage connector block Reset Button RS-485 port & terminal resistor port

Open the catalog to page 3

Specifications Model Name Power Operating voltage range 9 Vdc to 25 Vdc (power port, can be supplied from inverter), 5 Vdc (Micro USB) Power consumption Communication Wired Certificate Safety standard 2x power port, 4x RS-485, 2x CANbus, 2x Dry Contact, 6x Digital Input Data Storage System Ready, Inverter Comm., Internet Comm. Operation temperature Relative humidity 160g (with Wi-Fi antenna) Model Name Input voltage range Nominal voltage Power consumption (with DC1) Current transducer Sensing aperture dimension Torque for screw terminal Weight (without current transformer) Ambient temperature...

Open the catalog to page 4