*myarchiexpo

DV905 RYM

Product catalog summary

Overview: This document is a technical data sheet for the DV905 executive line of office furniture, detailing specifications for tables, worktops, service units, and other components.

Tables and Worktops: The tables include desks, typing tables, extensions, and meeting tables available in various sizes. They are constructed using a 50 mm thick sandwich panel with an MDF frame, reinforced with steel pipes, and filled with a cardboard honeycomb structure. Worktops are available in several finishes, including low-pressure laminate, Fenix laminate, rear-lacquered glass, veneer, and hard leather, each with specific material compositions and thicknesses.

Metal Legs: The tables feature metal legs made from extruded aluminum with a square section, available in white, aluminum brill, or anthracite finishes. The legs include chrome-finished ABS tips and leveling feet.

Service Units: Service units are available in two depths and can be configured for left or right orientation. They are made from wood conglomerate with various finishes, including melamine, glossy laminate, and veneer. The units include sliding doors, internal dividers, and ventilation grids for cable management.

Drawer Units: Drawer units for service furniture are available in melamine, laminate, or veneer finishes. They feature soft-closing mechanisms and centralized locking systems with anti-tilt features.

Modesty Panels: Modesty panels are available in melamine, laminate, veneer, or leather finishes. They are attached to worktops using aluminum supports and steel locking rings.

Cable Management: The document describes horizontal and vertical cable management solutions, including inspectable cable channels and vertical cable columns with adjustable heights.

Specifications: The document details the construction and materials used for office furniture, specifically focusing on desks and storage units. The lateral extensions are attached to desks using 4 mm thick aluminum-colored metal plates. The metal legs are made from extruded aluminum with a square section of 50x50 mm, available in white or shiny aluminum finishes. They are equipped with chrome-finished ABS caps and adjustable black feet. The document also specifies the use of zamak plates or steel tie rods for attaching the legs to the desktops, depending on the size.

Storage Units: The storage units are available in depths of 66 and 92.5 cm, in both left and right versions. They are made from wood conglomerate covered with various finishes. The units include a top, bottom, sides, shelves, and an external back made from 25 mm thick wood conglomerate with various finishes. Sliding doors and internal dividers are made from 18 mm thick wood conglomerate with similar finishes. The units feature a central compartment with a metal grille for ventilation and cable access, leading to an aluminum outlet with a flap and brush.

Drawer Units: Available in three versions: melamine, laminate, and veneer. The melamine version is made from 18 mm thick wood conglomerate with visible ABS edges. The laminate version uses 16 mm thick wood conglomerate with glossy methacrylate edges. The veneer version features a transparent lacquered finish with varnished wood edges. Drawer sides are available in melamine or metal, both with a soft-close mechanism.

Handles: Three types of handles are available: Type Q with 96 mm spacing, Type V with 256 mm spacing, and Type T with 256 mm spacing, made from zamak or anodized aluminum in various finishes.

Back Panels: Made from 18 mm thick wood conglomerate with melamine, laminate, veneer, or leather finishes. They are attached to the desktops using zamak supports and steel locking rings.

Cable Management: Horizontal and vertical cable management solutions are provided, including accessible trays and vertical ducts made from painted steel or aluminum. A telescopic cable column is also available, adjustable in height from 64 cm to 73 cm.

Worktops: Available in various sizes and configurations, including laminate, Fenix laminate, glass, veneer, and leather finishes. The worktops are constructed using a sandwich panel design with MDF frames and steel reinforcements, filled with honeycomb cardboard or expanded polystyrene. Edge profiles are made from extruded aluminum in different finishes.

Catalog excerpts

LINEA DIREZIONALE EXECUTIVE LINE SERIES EJECUTIVAS LIGNES DE DIRECTION DIREKTIONSEINRICHTUNGSPROGRAMME LINHA DIRECÇÃO

Open the catalog to page 1

Scheda tecnica • Canalizzazione orizzontale: canale passacavi ispezionabile, disponibile in diverse lunghezze, realizzato in tondino di acciaio verniciato colore alluminio con staffe di ancoraggio in lamiera sp. 3 mm colore alluminio goffrato, da fissare ai piani dei tavoli (optional). • Canalizzazione verticale: canale verticale per gamba realizzato in lamiera AISI 430 piegata, viene fissato a scatto sul montante della gamba. • Colonna passacavi: realizzata in lamiera piegata e saldata sp. 1 mm colore alluminio. Prevede un supporto interno per il fissaggio della scatola Schuko, coperchio per...

Open the catalog to page 3

DV905 Technical data sheet

Open the catalog to page 4

Technical data sheet • Melamine modesty panel: made of wood conglomerate 18 mm thick coated with white, aluminium, light oak, tobacco oak, dark oak or black matt melamine finish and 2 mm thick ABS edge-banding. • Laminate modesty panel: made of wood conglomerate 16 mm thick, coated with 1.2 mm thick gloss white laminate and 2 mm thick methacrylate edge-banding. • Veneer Modesty panel: made in 18 mm thick wood conglomerate coated with transparent varnished light oak, dark oak or Canaletto walnut wood veneer, with lacquered wooden edge-banding. • Hard leather modesty panel: made of wood conglomerate...

Open the catalog to page 5

Ficha Técnica Realizadas en extrusión de aluminio de sección cuadrada 50x50 mm, en acabado blanco, aluminio brillo o antracita. Las patas están dotadas de extremos realizados en ABS acabado cromado, dotados de pies niveladores color negro. Para la fijación a los sobres de trabajo están previstas, dependiendo de la dimensión, placas superiores realizadas en presofusión de zamak o sistema con tirantes en acero. • Canalización horizontal: Canal pasacables registrable disponible en varias medidas de ancho y realizado en hilo de acero barnizado color aluminio con placas de anclaje en chapa de 3 mm...

Open the catalog to page 7

Fiche Technique Bureaux, tables dactylo, extensions, tables de réunion sont composés des éléments suivants: 120x60 cm, 200x60 cm, 180x90 cm, 200x100 cm, 220x100 cm, 100x100 cm. Réalisés avec un panneau sandwich ép. 50 mm composé comme suit: châssis sur le périmètre en MDF renforcé sur les cotés longs, avec tubes d’acier de 30x20 mm ép. 1,5 mm et rempli avec une structure nid d’abeilles en carton. • Plateau en laminé: Panneau supérieur en MDF ép. 4 mm avec revêtement en fin laminé ép. 0,5 mm blanc, chêne clair, chêne tabac, chêne foncé. Panneau inferieur en MDF ép. 4 mm avec revêtement en fin...

Open the catalog to page 8

Fiche Technique • Voiles de fond mélaminé: réalisés conglomérat de bois ép. 18 mm avec revêtement en mélamine blanc, aluminium, chêne clair, chêne tabac, chêne foncé ou noir mat avec les chants en ABS ép. 2 mm. • Voiles de fond en laminé: réalisés en conglomérat de bois ép. 16 mm avec revêtement en laminé luisant anti-rayures ép. 1,2 mm blanc, et chants en méthacrylate luisant ép. 2 mm. • Voiles de fond en placage: réalisés en conglomérat de bois ép. 18 mm auquel est appliqué un placage de chêne clair, chêne foncé ou noyer Canaletto laqué transparent, avec chants en bois vernis. • Voiles de fond...

Open the catalog to page 9

HINWEIS: ALLE METALLELEMENTE

Open the catalog to page 11

Ficha Técnica Realizadas em alumínio extrudido de secção quadrada 50x50 mm, acabamento branco, alumínio brill ou antracite. As pernas são equipadas com ponteiras realizadass em ABS com acabamento cromado, dotadas de pézinhos niveladores na cor preta. Para a fixação aos tampos de trabalho estão previstas, e segunda as dimensões, placas realizadas em zamak fundido ou sistema com tirantes em aço. • Canalização horizontal: Canal passa-cabos inspecionável disponível em diversos comprimentos e realizado em aramado de hastes de aço pintado cor alumínio com suporte de ancoragem em chapa de aço espessura...

Open the catalog to page 13