Project ___________________________________ Item _____________________________________ CSI Section 11400 Approved _ _______________________________ Date _____________________________________ Mobile Open Frame Tray And Rack Dispensers stack, stack, stack, stack, stack, stack, stack, stack, 11”x15” trays 12”x16” trays 12”x21” trays 14”x18” trays 14”x22” trays 16”x22” trays 18”x26” trays 20”x21” trays stack, stack, stack, stack, stack, stack, stack, stack, Standard Features • Tubing and base to be 16-gauge stainless steel • Tubing and base to be integrally welded • Base to be reinforced with 14-gauge stainless steel angles • Non-marring gray corner bumpers • (4) 4.00” diameter polyolefin swivel casters (all locking) • Dispenser platform carrier shall be 18gauge stainless steel • Self-leveling mechanisms shall be adjustable by adding and removing stainless steel extension springs located inside the elevator housing • Each dispenser section holds approximately 50-60 trays (varies per tray style) • One year parts and 90 day labor standard warranty. Additional warranties available 11”x15” trays 12”x16” trays 12”x21” trays 14”x18” trays 14”x22” trays 16”x22” trays 18”x26” trays 20”x21” trays Options & Accessories • Heavy-duty casters • Flange-mount feet in lieu of casters • Napkin dispensers • Six- or eight-hole silverware bins with plastic or stainless steel cylinders • Wrap-around bumpers (adds 1.75” [4.4cm] to overall length and depth) • Dust cover Specifications Framework shall be integrally welded 1.00” (2.5cm) O.D. 16-gauge stainless steel tubing welded to a 16-gauge stainless steel base. Frame shall have stainless steel horizontal support rods affixed to the tubing. Base shall be reinforced with full-length 14-gauge stainless steel angles. Self-leveling mechanisms shall be field adjustable by adding or removing stainless steel extension springs located inside the elevator housing. Casters: Unit shall have four 4.00” (10.2cm) diameter polyolefin swivel casters (all locking) (5.00” [12.7cm] ride height) and non-marking gray bumpers at each corner. Dispenser platform carries shall be 18-gauge stainless steel and shall be removable for cleaning. Each dispenser shall have 2 self-leveling mechanisms. 980 S. Isabella Rd. Mt. Pleasant, Michigan 48858 Mobile Open Frame Tray And Rack Dispensers

Plan View TT Models Plan View TT2 Models Mobile Open Frame Tray And Rack Dispensers Elevation View TT Models Elevation View TT2 Models Maximum Tray Size Right End View All TT & TT2 Models NOTES: • Standard corner bumpers add 1.75" (4.4cm) to overall length and width. • TT2 models dispense two separate stacks of trays. Delfield reserves the right to make changes to the design or specifications without prior notice. 980 S. Isabella Rd. Mt. Pleasant, Michigan 48858