Catalogs >
Delfield >
FT2-SN Shelleymatic

FT2-SN Shelleymatic
2Pages

Catalog excerpts

Project ___________________________________ Item _____________________________________ Mobile Open Frame Multi-stack Tray and Rack Dispensers CSI Section 11400 Approved _ _______________________________ Date _____________________________________ Fiberglass two stack dispenser, 12” x 16” maximum tray size Fiberglass two stack dispenser, 14” x 18” maximum tray size Fiberglass two stack dispenser, 16” x 22” maximum tray size Stainless steel two stack dispenser, 12” x 16” maximum tray size Stainless steel two stack dispenser, 14” x 18” maximum tray size Stainless steel two stack dispenser, 16” x 22” maximum tray size Standard Features • • • • Tubing and base is 16 gauge stainless steel Tubing and base is integrally welded Base to be reinforced with 14 gauge stainless steel angles Center housing top to be 16 gauge stainless steel, which houses two napkin dispensers ([2] model ND-57) Silverware bin to have (10) holes and made of stainless steel Plastic silverware cylinders provided standard Non-marring gray corner bumpers (4) 4.00” diameter polyolefin swivel casters (all locking) Dispenser platform carrier shall be 18 gauge stainless steel Self-leveling mechanisms shall be adjustable by adding and removing stainless steel extension springs located inside the elevator housing Options & Accessories • • • • • • Heavy-duty casters Special tray dispenser sizes Flange-mount feet in lieu of casters Stainless steel silverware cylinders in lieu of plastic Additional plastic or stainless steel silverware cylinders Wrap-around bumpers (adds 1.75 [4.4cm] to overall length and depth) Specifications Framework shall be integrally welded 1.00” (2.5cm) O.D. 16-gauge stainless steel tubing welded to a 16gauge stainless steel base. Frame shall have stainless steel horizontal support rods affixed to the tubing. Base shall be reinforced with full-length 14-gauge stainless steel angles. cylinders. Silverware bin shall be provided with 10 plastic silverware cylinders. Fiberglass model’s center housing shall be two-piece molded fiberglass (specify color) with stainless steel corners. The fiberglass-reinforced polyester (F.R.P.) shall be molded with permanent color. Stainless steel model’s center housing shall be constructed with 20-gauge stainless steel. All model’s center housing top shall be 16-gauge stainless steel. Top will contain two shelleymatic model ND-57 drop-in napkin dispensers. Dispenser platform carrier shall be 18-gauge stainless steel and shall be removable for cleaning. Each dispenser shall have two self-leveling mechanisms. Silverware bin shall be stainless steel, spot welded together, with ten holes to accept silverware 980 S. Isabella Rd. Mt. Pleasant, Michigan 48858 Unit shall have 4.00” (10.2cm) diameter polyolefin swivel casters (all locking), and non-marking gray bumpers at each corner. Self-leveling mechanisms shall be field adjustable by adding or removing stainless steel extension springs located inside the elevator housing. NOTE: For more information on the drop-in napkin dispensers, request a specification sheet for Shelleymatic model ND. FT2-SN/FT2-SN-SS: Mobile Open Frame Multi-stack Tray and Rack Dispensers

Open the catalog to page 1

Mobile Open Frame Multi-stack Tray and Rack Dispensers Elevation View All Models Right End View All Models Specifications Maximum Tray Size Ship Weight Delfield reserves the right to make changes to the design or specifications without prior notice. 980 S. Isabella Rd. Mt. Pleasant, Michigan 48858

Open the catalog to page 2