Product data sheet Langenthaler Str. 4 69434 Hirschhorn/Neckar Germany phone 00-49-6272-689-0 fax 00-49-6272-689-30 Version: 10ZT09E mgraving Materials Product Description Engraving materials are decorative high-pressure laminates ( HPL ) as specified in DIN En 438-1 and come mainly in solid colours. As opposed to standard laminates, engraving material has a triple-layer, symmetric construction of melamine resin cellulose layers. Each layer has its own distinct colour. Usually, the colours of the outer two layers contrast strongly with the core colour. This contrast makes the engraving stand out, distinctly improving legibility. The overlay layers are kept thin for engraving purposes. Their thickness is 0.1 mm. High gloss surface finishes add to the contrast with the core layer. The plain coloured papers are uniformly dyed. Batch to batch colour uniformity is guaranteed meaning laterorders match existing colours perfectly. The papers are free of heavy metals and highly resistant to light, having a DIN 53799 rating of 6 or 7. Aluminium foil can also be applied as double sided cover layer to the core by means of high pressure for use as an engraving material. Available Products GR E 018 bwb ( blue white blue) glossy GR E 027 gsg ( yellow black yellow) glossy GR E 003 gsg ( grey black grey) glossy GR E 019 gwg (green white green) glossy GR E 027 gwg (yellow white yellow) glossy GR E 013 rwr ( red white red) glossy GR E 011 sws (black white black) glossy 1 Engraving material

GR E110 wbw (white blue white) glossy (white red white) glossy (white black white) glossy GR GR E 110 wrw E 110 wsw GR 250 s 251 (A250 black A251) smooth The colours of the listed available products are shown in the dekoplus and starline brochures. 49 colour combinations are possible. Balancing Layer and Engraving Materials Engraving material is a material that requires no high-density fibreboard and therefore no balancing layer when used. Dimensions and Quality All engraving sheets come in 605 x 1220 mm or 805 x 1220 mm dimensions and are shrink-wrapped in four-pack units. ( Special sizes and...

Dviations in the thickness are also subjected to the limits specified in DIN EN 438. Nominal thickness Maximum tolrance 0.6 - 1.0mm ± 0.10mm > 1.0- ZOmm ± 0.15mm >2.0- 2.5 mm ± 0.18 mm >2.5- 3.0 mm ± 0.20 mm If you require thicker engraving material, we suggest you contact us. The fire behaviour of the engraving material is classified as B 2 according to DIN 4102. Engraving material is only pressed in standard quality. Applications and Working with the Material The engraving material is suitable for all nameplates, designation tags and signs. When used outdoors, moisture may affect the long-term...