Product Data Sheet Langenthaler Str. 4 69434 Hirschhorn/Neckar Germany phone 00-49-6272-689-0 fax 00-49-6272-689-30 Version: 10ZT09E dekorial S Product description Under the name dekorial stratos is to be understood real aluminum laminated plastic boards (HPL) in different surface treatment and colors. This metal layer is applied on a phenolic resin core with high pressure. All implementations are coated with a UV-paint on acrylic base. The paint has an abrasive hardness according to DIN EN 438 of > 1.5 N. The painted surface is resistant to all usual household cleaning agents, solvents and alcohol. Small gloss-level differences (in case of the light silk gloss) are conditional through variations in the surface roughness of the aluminium foil. Smaller impressed dents are unavoidable and normal, in accordance with the present state of the art. The same applies for the color of the products listed here. This can vary minimally manufacture-related, however, the general impression is not disturbed by that as a rule. This real metal surface is suitable for individual interior design. Counter-surface for stratos: A 209 real aluminum smooth and coated (natural color) This aluminum quality can be recommended as a low-cost counter-surface in smooth finish and also in hammered structure. 1

Form of delivery and quality stratos plates are supplied in the standard dimensions 2440 x 1220 mm. The tolerance for the length and width nominal dimension must correspond to DIN EN 438, with the limits 0 mm and + 10 mm. The plate thickness in case of stratos - plates is produced as 0.8 mm as standard (Weight: 1.4 kg/m2 ). The limits apply also for the thickness deviations according to DIN EN 438. Nominal thickness Limiting deviations 0.6 Mm -1.0 > 1.0 Mm -2.0 > 2.0 Mm -2.5 > 2.5 Mm -3.0 ± 0.10mm ± 0.15 mm ± 0.18mm ± 0.20 mm The purchase of thicker stratos plates can be clarified by an in-house...

Applications and processing directives The employment of dekorial stratos is provided for dcorative vertical surfaces in interior finish. Also slightly stressed surfaces can be covered with stratos. Typical application examples are: Wall panels, ceiling covers, home furniture, hotel and restaurant furniture, drawer fronts, company signboards, paneling in shelf construction, counters and displays in store construction, door and frame paneling, ship building, freight-car construction etc. For a stressed working area with stratos a glass pane or similar is recommended for protection. See also our...

Bonding HPL plates with metal foil The bonding of real metal HPL with - Contact adhesives (solvent-content) - Condensation adhesives (resorcinal-phenolic adhesive) 1 1 1 requires spcial care and adhrence to the sp驩cifications of the adhesive manufacturer. To be specially noted are uniform not too thick adhesive application, sufficient ventilation (insufficient ventilation can result in time in bubble formation between the metal foil and laminate core and/or detachment of the metal foil from the laminate core Discussions with manufacturer opossibly required Standard value table for the adhsion...

Cleaning and maintenance The cleaning of the stratos surface is implemented with a clean cloth, a soft sponge with soap and plenty of water or with a glass cleaner. Scrubbing cleaning agents, acids and caustic solutions should not to be employed. Storage The stratos laminated plastic boards must be stored horizontally supported over the entire surface, with 200 mm separation from the floor, in a closed room at 18-25°C and 50-60% relative humidity. Base material and laminated plastic should be stored, as far as possible, in the same room. A uniform environmental conditioning is guaranteed in this...