Dekorial starline
6Pages

LAMWATE TECHNOLOGY IAMINATE ECHNQlQGY Product data sheet Langanmtai Sir. 4 69434 HWschhaiVNeckar Germany phone 00-49-6272-689-0 IflX 00^9 62/2-689-30 Version; 10ZT09E dekorial star H ne Product Description The name dekorial - startine stands for a high pressure laminate with a genuine Aluminium surface. Tnis surface is applied to a core of phenolic resin using high pressure. A highly rΩsistant aluminium surface is obtained by electrical oxidisation for mirror quality or by use of laquer As the anodized aluminium is an intgral part of the surface layer it gives the product a permanent protection against "external" influences. A spcial heat-curing laquer on the basis of an Epoxide resin or a PU laquer is also used in many cases as a protection for the m驩tal surface. The aluminium layer can be delivered if required with a smooth, brushed or embossed surface. The typical metallic character is obtained by pressing in the original colours. A transparent colouration combined with a surface structure gives further openings for a dcorative effect. A slight unevenness in the surface (with structures) and slight variations in shme of the aluminium surface lamintes are one of the features of this product. The slight indentations are at the pr颩sent stand of the technique and are unavoidable and normal. Slight colour variations occur during the production process and are not detrimental tothe overall appearance. Pure aluminium products are often pressed with a smooth surface. Other surface structures such as Honeycomb (WAF), Barleycorn (GEK) or Pinpoint (PNT) are available. For spcial effects a groove along or across the board with diffrent embossing (603 - 610) on either side bring out the metallic character. A 210 Pure aluminium smooth and anodized (Natural) Mirrorquality A 211 Pure aluminium smooth and anodized (Gold) Mirrorquality A 216 Pure aluminium smooth and anodized (Gunmetal) Mirrorquality A 246 Pure aluminium smooth, matt, anodized (Natural) The optimal mirror-cffect Is only achleved by using a smooth-metal surface. By using the grooved structure (see dekovarlo Prospectus) combtned with the mirror-quality further variations are possible. The product A 246 has proved its value in kitchen fronts. A 246 is only available in smooth surface, with a thickness of 1.5 mm. 1 star lin n

A 350 and A 356 Highly scratch-resistant A 350 and A 356 are provided with a spcial lacquer The surface protection lacquer has a scratch hardness in EN 438 of 1,2 N (The standard version reaches a scratch hardness of approx. 0,5N). A comparison test with a common household steel-sponge. applied with weights while brushing in the transverse direction to the brushing of the sheet, bore the following resuit: A 350 and A 356 with a 10 kilo peaMoad showed no scratch marks. Standard versions from 2 kilos on showed slight scratch marks - and from 5 kilos on showed clear scratch marks. Backing...

The limits for variations in thickness are governed by EN 438. Nominal thickness Maximum tolrances 0.6 > 1.0 > 2.0 > 2.5 1.0 mm 2.0mm 2.5 mm 3.0mm ± 0.10 mm ± 015 mm ± 0.18 mm ± 0.20 mm If thicker sheets of starline are required, direct contact with Dekodur® is advisable. Behaviour in case of fire - the standard quality is classified as B2 - B1 when tested according to DIN 4102. For starline sheets in the quality "flame retardant" a direct contact with Dekodur® is advised. This quality is certified by Lloyd's Register and fulfils the requirements of IMO FTC. A protective foil is absolutely...

Application and Processing Dekorial-starline is intended for use as dcorative vertical surfaces in interior application, also for surfaces which are not exposed to heavy wear. Typical applications are: Wall cladding, ceiling cladding, home furniture, hotel and restaurant furniture, fronts of drawers, signs for shops and firms, shelve cladding, counters and displays in shops, surfacing for doors and doorframes, shipbuilding, wagon and coach fittings etc. For use on surfaces exposed to heavy wear, it is recommended that the surface be protected by a glass sheet. The starline lamintes can be...

Bonding HPL-sheets surfaced with pure mtal foils The bonding crf MPI shoots surtacod with pure mlai sheets usfig requires sp骩cial prcautions and close adhrence to the manufacturera instructions Sp驩cial attention must be paid to a un)formt but not too hi(ier ghjespred. sufftcient aring (insufflaient anng can le ad to later-on blistering between the metalfoil and the ccre of the laminai and/or lead to the seperaticfi ol the melaltoi lo the fciminat Hère contact with the manutaclurer rs essentid) and sutficaent pressure in the press The surfaces to be bcrided shotid be kept as smal as...

Cleaning and maintenance Cleaning the surface of a stariine sheet is best carried out using a clean cloth, or a soft sponge using soap and plenty of water or a glass cleaner. Abrasive cleaners, acids, or alkalise should never be used. Storage The stariine sheets should be stored in a closed room with a temprature of 18-25X and 50-60% relative humidity. Furthermore, they have to be stored full-laminar and horizontally with a distance of 200 mm to the ground. The sheets - are to be protected from moisture - should not be exposed to direct sunlight - should not be stored in a warm-air-stream...