Dekorial antique
5Pages

Product data sheet Langenthaler Str. 4 69434 Hirschhorn/Neckar Germany phone 00-49-6272-689-0 fax 00-49-6272-689-30 Version: 10ZT09E dekorial Product Description The name dekorial - antique stands for a high pressure laminate (HPL) with surface of pure copper. The metal sheet is applied to a core of phenolic resin using high pressure. All our products are coated with an UV - lacquer based on acryl. The lacquer has scratch hardness in EN 438 of > 1, 5 N. The surface is unaffected by common household agents / solvents. Alcohol has no effect. Slight variations of the silky shine / gloss coming from raw copper material are unavoidable. A slight unevenness in the surface of the laminates is one of the features of this product. The slight indentations are at the present stand of the technique and are unavoidable and normal. The same holds for the colours. Slight colour variations may occur during the production process and are not detrimental to the overall appearance. The pure metal surface is suitable in connection with rustic surface structures for individual internal decorative fittings. These are enhanced by the possibility of a brown toning. The various products available are characterised by stark surface structures. Backing sheets for antique: 1. C 409 real - copper (brown-toned or lacquered) This copper-variety without special quality requirements is suited as a backing sheet. 2. A 209 real-aluminium smooth and lacquered (natural colour) This aluminium-quality can also be recommended, produced in smooth surface or hammered-structure as an inexpensive backing sheet. antique 1

Dimensions and Quality All antique sheets are delivered in the standard dimensions 2440 mm x 1220 mm. The tolerance limits for the dimensions along and across the sheets as required in EN 438 are: - 0 mm and + 10 mm The antique sheets can be produced in thickness from 1.2 mm to 3.0 mm. The standard thickness is 1.2 mm, giving a density of 2.1 kg/m2. The limits for variations in thickness are also governed by EN 438: Nominal thickness Maximum tolrances 0.6- 1.0mm > 1.0-2.0mm > 2.0-2.5mm > 2.5-3.0 mm ± 0.10 mm ± 0.15 mm ± 0.18 mm ± 0.20 mm If thicker sheets of antique are required, direct...

Application and Processing Dekorial - antique is intended for use as dcorative vertical surfaces in interior application, also for surfaces which are not exposed to heavy wear. Typical applications are: Wall cladding, ceiling cladding, home furniture, hotel and restaurant furniture, fronts of drawers, signs for shops and firms, shelve cladding, counters and displays in shops, surfacing for doors and doorframes, shipbuilding and coach fittings etc. For use on surfaces exposed to heavy wear, it is recommended that the surface should be protected i.e. by a glass sheet. The antique lamintes can...

Bonding HPL-sheets surfaced with pure metal foils The bonding of HPL sheets surfaced with pure metal sheets using - c contact glues (containing s oolvent) -1 condensation glees (resins based on phenol anb/or resorcinol) requires special precautions and close adherence to the manufacturer's instructions. Special attention must be paid to a uniform, but not too higher gluespred, sufficient airing (insufficient airing can lead to later-on blistering between the metalfoil and the core of the laminat and/or lead to the seperation of the metalfoil to the laminat. Here contact with the...

Cleaning and Maintenance Cleaning the surface is best carried out using a clean clolh or soft sponge, using soap and plenty of water or a glass cleaner. Abrasive cleaners, acids or alkalise should never be used. Storage The antique sheets should be stored in a closed room with a temprature of 18-25°C and 50-60% relative humidity. Furthermore, they have to be stored full-laminar and horizontally with a distance of 200 mm to the ground. The sheets - are to be protected from moisture - should not be exposed to direct sunlight - should not be stored in a warm-air-stream Should horizontal...