Product Data Sheet Langenthaler Str. 4 69434 Hirschhorn/Neckar Germany phone 00-49-6272-689-0 fax 00-49-6272-689-30 Version: 10ZT09E dekopin Magnetic panels Applications and instructions for use dekopin magnetic panels can be sawed, milled and drilled using carbide tipped tools. All HM circular saw blades with a sufficiently high number of teeth and a trapezoidal/trapezoidal saw tooth pattern are suitable. It is generally possible that the type of material used may cause flying sparks during processing. Always make sure that the panels are flat during transport to prevent cracks and bends in the surface. Cleaning of magnetic panels The HGL high-gloss surfaces are suitable for marking with a board marker. We recommend board markers from edding (360 and 363). Markings made with suitable board markers can be wiped off in dry condition. The MAT matte surfaces are suitable for marking with chalk and can also be used as a projection surface. We recommend ILLUMIGRAPH liquid chalk from ZIG in this case. However, the open-pore surface cannot always be wiped completely clean in dry condition. Before the first use, after peeling off the protective foil both surfaces must be cleaned initially in order to remove any residue! There is no guarantee that dekopin magnetic panels can be cleaned so that they are completely free of residue, since the quality of the markers used is beyond our control. Therefore, we recommend testing the various markers before use or to make 1 Magnetic panels

a gnral cleaning from time to time. Ethyl alcohol and the thinner V 100 from Edding have been proved for that purpose. Delivery form and quality dekodur magnetic panels are delivered in the format 2,440 x 1,220 mm. The thickness is 1.0 mm. The tolerances for the length and width must correspond to the permissible deviations according to DIN EN 438 of - 0 mm and + 10 mm. Storage The magnetic panels must be stored in a closed room at 18 - 25°C and 50 - 60 % relative humidity, with full-surface contact and horizontally at a distance of 200 mm from the floor. Protect the stacked panels from - moisture...