Trelisio Woven Wire Panel
2Pages

Description Decoustics Suspended Reveal acoustical ceiling panels consist of a medium density core and an attractive range of finishes. The plenum or back side of panels is supplied complete with a clear vapor retarder and mounting clips. Typically employed in areas where a floating panel effect is desired, a minimum 4" (100 mm) reveal is required around each panel to facilitate installation. Note: a progressive installation is possible which will allow a 1" (25 mm) reveal around each panel with the exception of the perimeter panels where the minimum 4" (100 mm) reveal is still required. Panels All Decoustics panels are custom fabricated and offered in a variety of types, sizes, geometric shapes, ellipses, vaults, acoustical domes, thicknesses, and finishes. Limitations Panel spans or sizes are limited to 120" x 60" (3050 mm x 1525 mm) for fabric finished panels, considering fabric width availability, 120" x 48" (3050 mm x 1220 mm) for vinyl panels, and 72" x 48" (1830 mm x 1220 mm) for coated finishes. Design Considerations A minimum space of 6" (150 mm) between the back of the panel and the structure above is required to install the Suspended Reveal system.Plenum space above ceiling is largely non-accessible. Individual de-installation of panels is possible if localized access is required. All lights, diffusers, speakers, smoke detectors, sprinklers, and similar items that penetrate or are located in the ceiling must be independently supported. The panels are not structurally capable of supporting the weight of any of these items. When using speakers in ceiling or wall panels, it is recommended the speaker grille be visibly mounted at the face of the panel. Speaker function creates air movement and any fabric covering the speaker will experience premature soiling. Mounting Methods Mechanically mount using installer supplied T-bar having a 15/16" (24 mm) face flange and 1-1/2" (38 mm) web height. Note: T-bar is first secured to factory installed DPC-2 clips mounted on panel backs and then the completed assembly is hung in place using hanger wires or rods typically on 48” (1220 mm) centers along each ‘T’ bar. Only handle panels wearing clean, lightweight, white gloves during installation. Follow manufacturer's printed instructions for installation as well as field cutting of panels. Standards, Tests and Approvals Surface Burning Characteristics (ASTM E-84): All panel components have a Flame Spread rating of less than 25. Note: Building code requirements may necessitate composite panel testing based on specified finish. A panel comprised of “Class A” (Flame Spread of 25 or less) components does not necessarily produce a composite panel meeting the “Class A” requirement. Decoustics has a considerable number of composite panel tests on file. Acoustical Data (ASTM C423: Type E400 Mounting as per ASTM E795). Ceilings Suspended Reveal FINISH PANEL FREQUENCY (Hz) NRC SAA THICKNESS 125 250 500 1000 2000 4000 * Fabric 1” (25 mm) 0.46 0.52 0.94 1.01 1.10 1.13 0.90 0.87 * Fabric 2” (50 mm) 0.42 0.77 1.05 1.09 1.09 1.08 1.00 0.97 Claro or 1-1/16” (27 mm) 0.39 0.63 0.83 1.05 Metallo 1.05 1.00 0.90 0.87 Quadrillo QPP-19 Panel 1-1/8” (28 mm) Core 3/4” (19 mm) 0.78 0.77 0.61 0.86 1.04 0.70 0.80 0.82 QPP-25 Panel 1-3/8” (35 mm) Core 1” (25 mm) 0.74 0.79 0.72 1.00 1.02 0.78 0.90 0.88 QPP-50 Panel 2-3/8” (60 mm) Core 2” (50 mm) 0.80 0.87 1.00 1.07 1.06 1.00 1.00 0.98 Substrate T-bar (not by Decoustics) DPC-2 Panel clip Hanger wire (not by Decoustics) Reveal Reveal *Acoustic testing was performed on a panel finished with an acoustically transparent fabric.

e-mail: sales@www.decoustics.com decoustics.com For LEED, BREEAM, and environmental information, please visit our website’s home page. 06/10 Ceilencio, Claro, Metallo, Quadrillo, Solo and Trelisio are trademarks of Decoustics Limited. Maintenance Refer to appropriate Decoustics "Cleaning & Maintenance Instructions" for any specific finish. Related Data Decoustics 3-Part Guide Specification. Ceilings Suspended Reveal Note: The information provided in this Data Sheet is accurate to the best of our knowledge at the time of printing. However, we reserve the right to make changes when necessary...