Catalogs >
Decoustics >
Suspended Accesible Reveal

Suspended Accesible Reveal
2Pages

Catalog excerpts

Ceilings Substrate Suspended Accessible Reveal Leveling channel (not by Decoustics) Description Stabilizer angle (not by Decoustics) 24” max. @ o/c Finish Acoustic Core Decoustics Suspended Accessible Reveal acoustical ceiling panels consist of a medium density core and an attractive range of finishes. The plenum or back side of panels is supplied complete with a clear vapor retarder and mounting clips. Typically employed in areas where a floating panel effect is desired, a minimum 1" (25 mm) reveal is required around each panel to facilitate installation. Panels clip onto an installer supplied frame or grid system and are individually removable by lifting upwards 3/4" (19 mm), moving sideways 1" (25 mm) and lowering. The frame or grid system is secured using hanger wires or rods. Panels Snap-in holding clip DHC25 (field installed) Leveling channel All Decoustics panels are custom fabricated and offered in a variety of types, sizes, geometric shapes, ellipses, vaults, acoustical domes, thicknesses, and finishes. Limitations Panel clip DPC-2 (factory mounted) Panel spans or sizes are limited to 120" x 60" (3050 mm x 1525 mm) for fabric finished panels, considering fabric width availability, 120" x 48" (3050 mm x 1220 mm) for vinyl finished panels, and 72" x 48" (1830 mm x 1220 mm) for coated finishes. Standards, Tests and Approvals Design Considerations Surface Burning Characteristics (ASTM E-84): All panel components have a Flame Spread rating of less than 25. Note: Building code requirements may necessitate composite panel testing based on specified finish. A panel comprised of “Class A” (Flame Spread of 25 or less) components does not necessarily produce a composite panel meeting the “Class A” requirement. Decoustics has a considerable number of composite panel tests on file. Acoustical Data (ASTM C423: Type E400 Mounting as per ASTM E795). A minimum space of 10" (250 mm) between the back of the panel and the structure above is required to install the Suspended Reveal system. Plenum space above ceiling is 100% accessible. All lights, diffusers, speakers, smoke detectors, sprinklers, and similar items that penetrate or are located in the ceiling must be independently supported. The panels are not structurally capable of supporting the weight of any of these items. When using speakers in ceiling or wall panels, it is recommended the speaker grille be visibly mounted at the face of the panel. Speaker function creates air movement and any fabric covering the speaker will experience premature soiling. FINISH PANEL THICKNESS 125 250 *Fabric 1” (25 mm) 0.46 0.52 0.94 1.01 1.10 *Fabric 2” (50 mm) 0.42 0.77 1.05 1.09 Claro or Metallo 1-1/16” (27 mm) 0.39 0.63 0.83 0.78 0.77 0.74 0.80 Quadrillo QPP-19 QPP-25 QPP-50 Panel 1-1/8” (28 mm) Core 3/4” (19 mm) Panel 1-3/8” (35 mm) Core 1” (25 mm) Panel 2-3/8” (60 mm) Core 2” (50 mm) FREQUENCY (Hz) 500 1000 2000 NRC SAA 1.13 0.90 0.87 1.09 1.08 1.00 0.97 1.05 1.05 1.00 0.90 0.87 0.61 0.86 1.04 0.70 0.80 0.82 0.79 0.72 1.00 1.02 0.78 0.90 0.88 0.87 1.00 1.07 1.06 1.00 1.00 0.98 4000 *Acoustic testing was performed on a panel finished with an acoustically transparent fabric.

Open the catalog to page 1

Ceilings Mounting Methods Suspended Accessible Reveal Maintenance Refer to appropriate Decoustics “Cleaning and Maintenance Instructions” for any specific finish. Related Data Mechanically mount only using installer supplied frame or grid system. Install Decoustics supplied hanger clips onto factory installed panel clips mounted on back of panel. Lift panel up, sideways and lower hanger clips onto frame or grid. Adjust hanger clips to ensure a flat, uniform ceiling. Follow manufacturer's printed instructions for installation as well as field cutting of panels. Note: The information provided...

Open the catalog to page 2