Catalogs >
Decoustics >
Stria Panel

Stria Panel
2Pages

Catalog excerpts

Description Decoustics Stria is a uniquely decorative wall panel that can incorporate graphics and logos. It consists of a medium density core and high density facer with 3/16" (5 mm) deep striations manufactured into the face of the panel which is then finished with fabric. Striations can be uniform or random - vertical, horizontal or diagonal; monochromatic or multi-colored (stripe pattern), and if desired, with a design such as a cityscape, corporate logo, school logo, or similar motif. Finishes are bonded to the face to prevent sag and distortion. Striations can be spaced as close as 1" (25 mm) and in the vertical mode look identical to panel joints thereby producing a monolithic appearance. Stria panels are recommended for use where panels are unlikely to be subjected to abuse or impact. Panels are supplied with factory installed devices for different types of mounting e.g. mechanical, adhesive, magnetic, and hook and loop fastening. Panels All Decoustics panels are custom fabricated and offered in a variety of sizes, geometric shapes, curves and thicknesses. Design Considerations When using speakers in ceiling or wall panels, it is recommended the speaker grille be visibly mounted at the face of the panel. Speaker function creates air movement and any fabric covering the speaker will experience premature soiling. Standards, Tests and Approvals Surface Burning Characteristics (ASTM E-84): All panel components have a Flame Spread rating of less than 25. Note: Building code requirements may necessitate composite panel testing based on specified finish. A panel comprised of “Class A” (Flame Spread of 25 or less) components does not necessarily produce a composite panel meeting the “Class A” requirement. Decoustics has a considerable number of composite panel tests on file. Acoustical Data (ASTM C423: Type F5 Mounting as per ASTM E795): Walls Stria FINISH PANEL FREQUENCY (Hz) NRC SAA THICKNESS 125 250 500 1000 2000 4000 * Fabric 1-1/8” (28 mm) 0.17 0.60 1.02 1.08 0.93 0.82 0.90 0.89 * Fabric 1-5/8” (41 mm) 0.42 0.72 1.10 1.11 0.98 0.92 1.00 * Fabric 2-1/8” (54 mm) 0.54 0.87 1.03 1.14 0.94 0.91 1.00 0.98 Substrate Wall clip Resin Hardened edges 1” panel 1/8” thick high density component Finish Leveling clip Panel clip Stria Line * Acoustic testing was performed on a panel finished with an acoustically transparent fabric.

Open the catalog to page 1

e-mail: sales@www.decoustics.com decoustics.com For LEED, BREEAM, and environmental information, please visit our website’s home page. 06/10 Ceilencio, Claro, Metallo, Quadrillo, Solo and Trelisio are trademarks of Decoustics Limited. Walls Stria Mounting Methods Mount panels to walls using mechanical fastening, adhesive, magnetic fastening or hook and loop fastening. Mechanically mount only for panels located above head height (includes slide and engage z-clips, wall clips and/or track). Only handle panels wearing clean, lightweight, white gloves during installation. If necessary, shim...

Open the catalog to page 2