Madero
20Pages

Natural Wood Finishes ^

A collection of impressive natural wood veneered acoustical finishes. It is possible to specify natural wood veneered panels with exceptional acoustical performance. Ideal for both wall and ceiling applications, Madero finishes maximize the warmth and rich figure of natural wood veneers, while achieving superb acoustical control. The Madero line is available in a wide variety of natural wood veneers or custom paint colors. Custom veneer layups and toning can be specified. Quadrillo is the premium finish in the Madero collection. Solo is a grooved plank finish cut to fit on site. Solo-M The...

Quadrillo Quadrillo is a natural wood veneer finish. Acoustical absorption is achieved through the use of Decoustics’ unique patented perforation technology in combination with a high performance acoustical core. The product is ideal for both wall and ceiling applications. Pear veneer, book matched, center balanced. Although the percentage of open area of Quadrillo is only approximately 4%, the patented V-grooves create a four sided "funnel" effect that allows sound to arrive at a variety of angles thereby focusing the transfer of energy over a broader surface area of absorption material....

The natural qualities of wood greatly enhance this boardroom however its use has traditionally been limited because of its poor sound absorption properties. Quadrillo is available prefinished in clear lacquer or factory painted. Decoustics can provide custom lacquer toning, tinting and sheen to match other wood finishes. Quadrillo finished panels are frequently used in conjunction with millwork veneered panels, and in such cases it is highly recommended that a single finishing source be used to match toning and sheen. In these instances, Decoustics can provide unfinished panels. Integrated...

Quadrillo finished panels in five separate sections installed between pilasters on side walls. Quadrillo is available up to 1240 mm x 3050 mm (4’ x 10’), however one should consider the potential problems associated with large units. Wood products have significant movement when subjected to climatic changes which can easily be overcome by using smaller panels. We typically recommend manageable sizes up to 20 square feet per panel. Quadrillo veneer lay up is produced as slip matched, quarter cut, as a standard. Other veneer cuts and lay up options are available. The minimum radius of an...

Type 5mm profile 10mm profile 20mm profile Create your own custom patterns by specifying profile spacings. Solid portions must be multiples of 5mm. Consult the factory for assistance.

Quadrillo Profiles The grooving can be stopped to create an integral border of any width, or you can specify a traditional frame.

Quality Standards & Specifications Quadrillo finish is made of high-density fibreboard (HDF) which is 30% denser than standard fiberboard and much more durable. The high-density fibers are more crisp in machining and not susceptible to felting or fluffing in the grooves. Thickness Quadrillo is finished using a two-step lacquer process that involves a “fill” first coat which is sanded and then top coated. The sheen value is high, consistently at a 30, and can be customized to any level. The lacquer and toning are brought into the grooves so the surface color is the same as the substrate....

Quadrillo When used as a monolithic panel system, kerfed edges with splines are used to level the face. The reveal between panels is 3 mm (1/8”) which simulates the “V” groove cut on 5 mm centres. Mounting Detail Example Acoustical core Furring Spline Climate Conditions Quadrillo panels must be stored, installed and maintained only in a stable ambient environment (humidity min. 35% - max. 55%, temperature not to exceed 27ºC / 80ºF). Quadrillo panels must be allowed to acclimatize on site for 72 hours prior to installation. Maple veneer, plain sliced, slip matched. Clear lacquer finish. Fire...

Solo-M panels are a modified version of the standard Solo product and an economic consideration in lieu of Quadrillo finished panels which offers large panels, design versatility and full customization. Solo-M is produced as a panel rather than planks and has the same quality standards, acoustic performance and fire rating as Solo. Solo-M is available prefinished in clear lacquer or unfinished for post application by others. Decoustics can provide custom lacquer toning, and sheen to match other wood finishes. Custom paint finishes are available. Veneer lay up is produced as slip matched,...

Solo-M Custom suspensions for Solo-M and Quadrillo panels Ceilencio custom ceiling suspensions. Ceilencio’s easy downward access is demonstrated using Solo-M panels. Conventional supensions for Solo-M panels Standard Lay-In Tegular Edge Lay-In Screwslot Grid Concealed Lay-In For all lay-in applications, a locking safety tether strap will be provided to secure panel to grid. Direct Mount - Wall Continuous furring channels Optional acoustical insulation Direct Mount - Ceiling Carrying channel, suspended as required by local codes Suspended continuous furring channels Optional acoustical...

Solo is an acoustical wood plank consisting of a medium density fibreboard (MDF) finished in a natural wood veneer. The face is grooved, the plank is perforated from behind and the back is laminated with an acoustically transparent black mat. This prevents insulation color from reading through. The plank is cut to fit on site and is typically installed on wood or steel furring with insulation placed behind the wood planks. The plank width measures 7-9/16" (192 mm) wide x 120" (3050 mm) long and has tongue and groove edges which is mounted to wood or to steel furring channels. Standard Solo...

Solo Solo is factory stocked in beech, cherry, and maple veneers quarter cut and pre-finished. Custom paint finishes are available. Solo is also available raw or pre-finished with a clear or custom toned lacquer.