Catalogs >
Decoustics >
High_Impact_Resistant_Trackable (HIR 1)

High_Impact_Resistant_Trackable (HIR 1)
2Pages

Catalog excerpts

High_Impact_Resistant_Trackable (HIR 1) - 1

Panel clip Resin hardened spots Control component Fabric/vinyl finish Wall clip Panel core Leveling clip Resin hardened edges High Impact Decoustics High Impact Resistant acoustic panel consists of a medium density core with a high density facer. The panel has high impact resistance and a smooth finish which is ideal for the application of light weight, thin or "low texture" fabrics which traditionally cannot be stretch-applied. This panel construction is also ideal as a tack Panels are supplied complete with factory installed hardware for different types of mounting e.g. mechanical, adhesive, magnetic, and hook and loop fastener. All H.I.R. #1 panels are custom fabricated and offered in a variety of sizes, geometric shapes, curves, thicknesses, and finishes. Design Considerations Concealed aluminum edge is required for oversize panels and certain curved applications. Contact Decoustics for further When using speakers in ceiling or wall panels, it is recommended the speaker grille be visibly mounted at the face of the panel. Speaker function creates air movement and any fabric covering the speaker will experience premature soiling. Standards, Tests and Approvals Surface Burning Characteristics (ASTM E-84): All panel components have a Flame Spread rating of less than 25. Note: Building code requirements may necessitate composite panel testing based on specified finish. A panel comprised of "Class A" (Flame Spread of 25 or less) components does not necessarily produce a composite panel meeting the "Class A" requirement. Decoustics has a considerable number of composite panel tests on file. Acoustical Data (ASTM C423:Type F5 Mounting as per ASTM E795). *Acoustic testing was performed on a panel finished with an acoustically transparent fabric. _SAINT-GOBAIN

Open the catalog to page 1

High_Impact_Resistant_Trackable (HIR 1) - 2

Walls Mounting Methods H.I.R. #1 Maintenance Refer to appropriate Decoustics “Cleaning and Maintenance Instructions” for any specific finish. Related Data Decoustics 3-Part Guide Specification. Note: It is not always possible to secure panels or mounting hardware to a substrate support such as a steel stud. Adhesive mount only is recommended for 5/8” thick panels. FINISH EDGE OPTIONS SIZES CONSTRUCTION Fabric or Vinyl Resin: square, bullnose, chamfer, pencil radius, miter, reveal. Up to 60" x 120" (1525 mm x 3050 mm). Panel consists of a 6 to 7 pcf (96 to 112 kg/m3) core with a 1/8" (3 mm)...

Open the catalog to page 2