Catalogs >
Decoustics >
High Impact Resilient Panel (HIR-2)

High Impact Resilient Panel (HIR-2)
2Pages

Catalog excerpts

Description Decoustics High Impact Resilient acoustical wall panel consists of a medium density core, impact resilient scrim facer (bonded to the core) and fabric finish. The scrim facer provides superior impact resistance and allows the fabric finish to return to its original position after impact. The panel is capable of withstanding high impact without crushing or fracturing. Panels are supplied with concealed factory installed mounting hardware. Panels All Decoustics H.I.R. #2 panels are custom fabricated and offered in a variety of sizes, geometric shapes, and thicknesses. Design Considerations A concealed aluminum edge is required for oversize panels and certain applications. Contact Decoustics for data. Panels are available in fabric finish only (no vinyl). When using speakers in ceiling or wall panels, it is recommended the speaker grille be visibly mounted at the face of the panel. Speaker function creates air movement and any fabric covering the speaker will experience premature soiling. Standards, Tests and Approvals Surface Burning Characteristics (ASTM E-84): All panel components have a Flame Spread rating of less than 25. Note: Building code requirements may necessitate composite panel testing based on specified finish. A panel comprised of “Class A” (Flame Spread of 25 or less) components does not necessarily produce a composite panel meeting the “Class A” requirement. Decoustics has a considerable number of composite panel tests on file. Acoustical Data (ASTM C423: Type F5 Mounting as per ASTM E795). Walls High Impact Resilient H.I.R. #2 FINISH PANEL FREQUENCY (Hz) NRC SAA THICKNESS 125 250 500 1000 2000 4000 * Fabric 1” (25 mm) 0.03 0.37 0.89 1.10 1.09 1.05 0.85 0.87 * Fabric 1-1/2” (38 mm) 0.15 0.58 1.01 1.13 1.10 1.03 0.90 * Fabric 2” (50 mm) 0.23 0.81 1.19 1.19 1.11 1.12 1.05 1.07 Substrate Wall clip Resin Hardened edges & spots Panel core Panel clip High Impact Resilient Control component Fabric finish Leveling clip Resin Hardened edges Mounting Methods Mount panels using mechanical fastening only (includes slide and engage z-clips, wall clips and/or track). Consult with fastener manufacturer to determine correct fastener to use for specific substrates, particularly plaster or gypsum board. Note: It is not always possible to secure panels or mounting hardware to a substrate support such as a steel stud. * Acoustic testing was performed on a panel finished with an acoustically transparent fabric.

Open the catalog to page 1

e-mail: sales@www.decoustics.com decoustics.com For LEED, BREEAM, and environmental information, please visit our website’s home page. 06/10 Ceilencio, Claro, Metallo, Quadrillo, Solo and Trelisio are trademarks of Decoustics Limited. Walls High Impact Resilient H.I.R. #2 Panel consists of a 6 to 7 pcf (96 to 112 kg/m3) density core, with an impact resilient scrim facer. Fabric corners are fully tailored (no exposed darting). 0.88 psf (4.30 kg/m2) 1.19 psf (5.81 kg/m2) 1.51 psf (7.37 kg/m2) FINISH EDGE OPTIONS SIZES CONSTRUCTION THICKNESS NRC WEIGHT 1" (25 mm) 1-1/2" (38 mm) 2" (50 mm)...

Open the catalog to page 2