Catalogs >
Decoustics >
High_Impact_Extreme

High_Impact_Extreme
2Pages

Catalog excerpts

A highly impact resistant acoustical panel. Panel clip Resin Hardened edges & spots High Impact Control component Fabric finish Wall clip Panel core Leveling clip Resin Hardened edges Standards, Tests and Approvals Surface Burning Characteristics (ASTM E-84): HIR Extreme has a composite Class A rating. Note: Building code requirements may necessitate composite panel testing based on specified finish. A panel comprised of "Class A" (Flame Spread of 25 or less) components does not necessarily produce a composite panel meeting the "Class A" requirement. Decoustics has a considerable number of composite panel tests on file. Acoustical Data (ASTM C423:Type F5 Mounting as per ASTM E795). *Acoustic testing was performed on a panel finished with an acoustically transparent fabric. Mounting Methods Mount panels using mechanical fastening only (includes slide and engage z-clips, wall clips and/or track). Consult with fastener manufacturer to determine correct fastener to use for specific substrates, particu- larly plaster or gypsum board. Note: It is not always possible to secure panels or mounting hardware to a substrate support such as a steel stud. High Impact Decoustics High Impact Extreme acoustical wall panel consists of a medium density core, high impact control component (bonded to the core) and fabric finish which can be stretched over or bonded to the core. The non p.v.c. high impact control component provides superior impact resistance and allows the fabric finish to retain its original position after impact. The panel is capable of withstanding very high impact without crushing or fracturing. Panels are supplied with concealed factory installed mounting hardware. All Decoustics Extreme panels are custom fabricated and offered in a variety of sizes, geometric shapes, and thicknesses. Design Considerations A concealed aluminum edge is required for oversize panels and certain applications. Contact Decoustics for data. Panels are available in fabrics including most polyesters, olefins, polyolefins, polypropylenes and Xorels. For good acoustical absorption, unbacked fabrics When using speakers in ceiling or wall panels, it is recommended the speaker grille be visibly mounted at the face of the panel. Speaker function creates air move- ment and any fabric covering the speaker will experience premature soiling.

Open the catalog to page 1

High Impact Refer to appropriate Decoustics "Cleaning specific finish. Related Data Decoustics 3-Part Guide Specification. No other acoustical panel combines aesthetics, exceptional acoustical performance, and abuse resistance. HIR Extreme is a Class A composite construction allowing application in any interior space. Note: The information provided in this Data Sheet is accurate to the best of our knowledge at the time of printing. However, we reserve the right to make changes when necessary without further notification. Suggested applications may need to be modified to conform with local...

Open the catalog to page 2