Group: Saint-Gobain
Catalog excerpts
Ceilings Custom Curved CONES Description Joint detail ±1/8” (3mm) defined joint Also see reveal option Decoustics acoustically absorptive panels provide architects and designers with conical ceilings without the problems of sound focussing and reflection normally associated with traditional hard surface finishes such as gypsum board, plaster, glass reinforced gypsum (GRG), fiber reinforced polyester (FRP), or wood. Cone Shape panels consist of complex, twodimensional pre-curved sections having a variable radius throughout the curve. Conical ceilings are made up of multiple, precisely engineered panels. A variety of mounting methods can be employed depending on plenum access requirements, available substrate, plenum clearance, and panel joint preference. e.g. defined, closed reveal or open reveal. Substrate Furring channel Panel Panels All Decoustics panels are custom fabricated and offered in a variety of types, sizes, geometric shapes, ellipses, vaults, acoustical domes, thicknesses, and finishes. Limitations Minimum radius is 30" (760 mm). Design Considerations “Furring” Channel Dome clip Panel Fabric covered closure strip REVEAL EDGE OPTION The panels alone can form the cone without the need for a conical substrate. If, however, a conical substrate already exists, panels can be directly mounted to it.Depending on panel radius and thickness, exposed darting along the edges may result with some fabric finishes which may or may not be prominent. However, darting is minimized when using Decoustics standard fabrics. Contact Decoustics for specific information. Darting will always be visible with vinyl finishes. Under certain lighting conditions, depending on panel radius and finish, manufacturing "ridge" lines may be visible. Contact Decoustics for best finishes to use with specific lighting.
Open the catalog to page 1Ceilings Mounting Methods Related Data Refer to specific ceiling system literature, e.g. Direct Mount, etc. for detailed data such as acoustical test data, fire test data, ceiling system details including perimeter trim options (ensure trim is compatible with pre-curved panels), and similar information. Note: Field cutting of panels is possible but not recommended. FINISH EDGE OPTIONS SIZES CONSTRUCTION Fabric or Vinyl Resin: square edge; "eased" edge up to 1/8" (3 mm) radius; bevelled or chamfered up to 1/8" x 1/8" (3 mm x 3 mm). Must have reveal joint. Fabric: Up to 48" x 120" (1200 mm x...
Open the catalog to page 2All Decoustics catalogs and technical brochures
-
Nuvola
8 Pages
-
Madero
20 Pages
-
Design Returns
4 Pages
-
Linear Wood & Linear Grille
4 Pages
-
LightFrame
8 Pages
-
Ceilencio What's New
2 Pages
-
Corporate
12 Pages
-
Air Renew
4 Pages
-
Metallo
2 Pages
-
High_Impact_Extreme
2 Pages
-
Low Frequency Tuner (LFT)
2 Pages
-
Suspended Reveal
2 Pages
-
Architectural Forms HCC
2 Pages
-
Architectural Forms HHC-Thin
2 Pages
-
Solo-T
2 Pages
-
Ceilencio
2 Pages
-
Claro-T
4 Pages
-
Solo-M
2 Pages
-
Coffer panel
2 Pages
-
Custom Curved Vault
2 Pages
-
Span
2 Pages
Archived catalogs
-
Suspended Accesible Reveal
2 Pages
-
Direct Mount system
2 Pages
-
Metallo
2 Pages
-
Claro
2 Pages
-
Stria Panel
2 Pages
-
Reflective Panel
2 Pages
-
Applique Panel (AQE)
2 Pages
-
Acoustical Panel (AP)
2 Pages
-
Trelisio Woven Wire Panel
2 Pages
-
Quadrillo Panel
2 Pages
-
Lay-In Panel
2 Pages
-
Direct Suspended System
2 Pages
-
Custom Curved Domes
2 Pages
-
Decoustics Recycled Content
9 Pages
-
Wall Panel Mounting Details
2 Pages
-
Wall Panel ArrangementsWall
2 Pages
-
Solo Installation
2 Pages