Catalogs >
Decoustics >
Architectural Forms HHC-Thin

Architectural Forms HHC-Thin
2Pages

Catalog excerpts

Ceilings Architectural Forms HCC - Thin Description Decoustics HCC – Thin composite construction is a very lightweight 3/4” (19 mm) thick panel, that is factory pre-curved to provide an artistic free form style of design. Panels are typically suspended in ceiling areas, and are suspended using as few as four supports/hangers. Finishes are applied to both sides of the panel and edges. Panels are mounted from factory located, field installed, eyebolts. Panels All Decoustics panels are custom fabricated and offered in a variety of types, sizes, geometric shapes, thicknesses and Decoustics proprietary coatings. Limitations Standards, Tests and Approvals Surface Burning Characteristics (ASTM E-84): All panel components have a Flame Spread rating of less than 25. Note: Building code requirements may necessitate composite panel testing based on specified finish. A panel comprised of “Class A” (Flame Spread of 25 or less) components does not necessarily produce a composite panel meeting the “Class A” requirement. Decoustics has a considerable number of composite panel tests on file. Acoustical Data (ASTM C423: Panels were tested using Type E400 Mounting as per ASTM E795). Acoustic test data was not available at time of printing. Please contact Decoustics for acoustic performance information. Mounting Methods Essentially non-accessible. Progressive removal of panels is typically necessary to access plenum space. However, limited, localized access can be accommodated if desired. Design Considerations Panels are typically hung in one position, however, they may be hung at an angle by adjusting the lengths of the suspension device e.g. hanger cable/chain, or rod. Dimensional tolerance of these panels is approximately +/- 1/8” (3 mm). Mechanically Mount only using installer supplied hanger cable/chain, or rods. Only handle panels wearing clean, lightweight, white gloves during installation. Follow manufacturers’ printed instructions for installation. Field cutting of panels is not recommended. FINISH EDGE OPTIONS SIZES CONSTRUCTION Claro or Metallo Square edge Up to 48" x 96" (1220 mm x 2440 mm) Panel consists of a multi-density, lighweight internal structure, with a 16 – 20lb/ft3 (256 – 320kg/m3) high density integral facer. THICKNESS NRC WEIGHT COLOR Overall 3/4" (19 mm) Data not available at time of printing 0.75 lb/ft2 (3.7 kg/m2) – based on a 48” x 96” (1220mm x 2440mm) panel. Standard White CSW100 (Claro), Or Custom colors (Claro and Metallo)

Open the catalog to page 1

Ceilings Architectural Forms HCC - Thin Indoor Climate HCC - Thin Storage Related Data Decoustics 3-Part Guide Specifications. On-site storage shall be such as to assure that all panels and associated materials are protected from damage, and storage area is climatically controlled to normal operational levels. Installation Prior to panel installation, the site must be free of all wet and dusty trades and the climatic conditions stabilized to normal operational levels. Panels shall be allowed to stabilize on site 24 hours prior to installation. Normal Operational Levels Typical Indoor...

Open the catalog to page 2