Catalogs >
Decoustics >
Applique Panel (AQE)

Applique Panel (AQE)
2Pages

Catalog excerpts

Description Decoustics Appliqué is an acoustical wall panel consisting of a medium density core panel and an "appliqué" component consisting of a 1/8" (3 mm) thickness high density proprietary facer which is adhered to the core panel to give the panel or panel area (multiple panels) a flush or 3-D (raised) effect in any design e.g. organizational logo, landscape, pattern, or similar design. Appliqué may also be employed for ceiling applications. Panels are supplied complete with factory installed devices for different types of mounting e.g. mechanical, adhesive, magnetic, and hook and loop fastener. Panels All Decoustics panels are custom fabricated and offered in a variety of types, sizes, geometric shapes, curves, thicknesses, and finishes. Design Considerations Raised appliqué is available with fabric, vinyl and coated finishes (ie. Claro and Metallo) or combinations of these finishes. Flush applique is available with fabric or vinyl finishes only. When using speakers in ceiling or wall panels, it is recommended the speaker grille be visibly mounted at the face of the panel. Speaker function creates air movement and any fabric covering the speaker will experience premature soiling. Standards, Tests and Approvals Surface Burning Characteristics (ASTM E-84): All panel components have a Flame Spread rating of less than 25. Note: Building code requirements may necessitate composite panel testing based on specified finish. A panel comprised of “Class A” (Flame Spread of 25 or less) components does not necessarily produce a composite panel meeting the “Class A” requirement. Decoustics has a considerable number of composite panel tests on file. Acoustical Data (ASTM C423: Type F5 Mounting as per ASTM E795): Walls Appliqué FINISH PANEL FREQUENCY (Hz) NRC SAA THICKNESS 125 250 500 1000 2000 4000 * Fabric 5/8” (16 mm) 0.01 0.25 0.67 0.98 1.01 0.96 0.75 0.71 * Fabric 1-1/8” (28 mm) 0.17 0.60 1.0 1.08 0.93 0.82 0.90 0.89 * Fabric 1-5/8” (41 mm) 0.42 0.72 1.10 1.11 0.98 0.92 1.00 * Fabric 2-1/8” (54 mm) 0.54 0.87 1.03 1.14 0.94 0.91 1.00 0.98 Substrate Wall clip Resin hardened spots 1”(25 mm) thick panel Panel clip Fabric or vinyl Leveling clip 1/8”(3 mm) thick flush appliqué component Resin hardened edges 1/8”(3 mm) raised appliqué component FLUSH RAISED *Acoustic testing was performed on a panel finished with an acoustically transparent fabric.

Open the catalog to page 1

e-mail: sales@www.decoustics.com decoustics.com For LEED, BREEAM, and environmental information, please visit our website’s home page. 06/10 Ceilencio, Claro, Metallo, Quadrillo, Solo and Trelisio are trademarks of Decoustics Limited. Walls Appliqué Mounting Methods Mount panels to walls using mechanical, adhesive, magnetic or hook and loop fastening. Mechanically mount only for panels located above head height (utilize slide and engage z-clips, wall clips and/or track). If necessary, shim adhesive, magnetic and hook and loop mounted panels to ensure flat substrate. Use adhesive and...

Open the catalog to page 2