LIVI
3Pages

Automations for residential sliding gates IN COMPLIANCE WITH STANDARDS with control board, limit switches and encoder EN OTHER CHARACTERISTICS IN COMPLIANCE WITH STANDARDS IN COMPLIANCE WITH STANDARDS IN COMPLIANCE WITH STANDARDS - Self locking with limit switches (magnetic only for version 6NET/M) - Speed adjustment and slow down in opening and closing - Motor control by encoder and obstacle detection All models have: fixing plate (to be screwed) included with control board and limit switches EN IN COMPLIANCE WITH STANDARDS IN COMPLIANCE WITH STANDARDS OTHER CHARACTERISTICS - Self locking with limit switches - Speed adjustment and slow down in opening and closing - Anti-crushing safety device All models have: fixing plate (to be screwed) included with control board and limit switches OTHER CHARACTERISTICS - Self locking with limit switches - Electronic force adjustment - Automatic working time learning - Controlled input for external safety device All models have: fixing plate (to be screwed) included * In order to respect the limit of impact forces foreseen by EN 13241-1, you must use the external safety devices in compliance with EN 12978. TECHNICAL INFO Motor power supply (V) Maximum power absorption (W) Duty cycle (cycles/h)* Motor thermal protection (°C) Speed (m/min) Standard pinion Weight with packing (Kg) Protection level

SLIDING GATES EXAMPLE OF A TYPICAL INSTALLATION Automation for residential sliding gates Foundation plate to be cemented Nylon rack, with fixing screws (1m) Pair of adjustable (15°) surface mounted photocells Pair of aluminium columns for photocells, height 55 cm Keyswitch with two contacts, surface mounted. Supplied with 2 keys. Led flashing light 230V with built-in antenna 433MHz Art. C-20 Mechanical safety edge 2m Art. TR2 2 channels remote control Black version art. TR2N also available (page 132)

Nylon rack, with fixing screws (1m) Galvanized steel rack 22x22mm (1m) Art. 113 Galvanized steel rack 30x12mm with zinc-plated spacers and fixing screws (1m) Unlocking device by cable for LIVI (4,5m). Safety enclosure to place external unlocking device handle Foundation plate to be cemented To be used with BLINDOS Art. D-BAND KIT Wireless transmitter and receiver kit in 868 MHz, for resistive or mechanical safety edges Art. C-20 Mechanical safety edge 2m Art. CR-20 Resistive safety edge 2m, according to EN12978 Art. C-16 Mechanical safety edge 1,6m Art. CR-25 Resistive safety edge 2,5m,...