LIVI 502
3Pages

Electromechanical automations for swing gates IN COMPLIANCE WITH STANDARDS without control board and arm OTHER CHARACTERISTICS For leafs up to 3m lenght Slow version, for leafs up to 4,5m lenght With encoder, for leafs up to 4,5m lenght All models have: fixing plate included, arm not included (see on page 64) Control board to complete the installation: control board cod. 677610 art. NET230N/C (with box) without control board and arm OTHER CHARACTERISTICS All models have: fixing plate included, arm not included (see on page 64) Control board to complete the installation: control board cod. 678261 art. NET24N/C (with box) GUIDE TO USE WITH ARTICULATED ARM GUIDE TO USE WITH SLIDING ARM leaf lenght = model 502 Motor power supply (V) leaf lenght leaf lenght = model 502 = model 502/24 If the leaf length is bigger than 2 meters or if you use reversible models you must install the electric-lock to block the gate in closed position The height and the leaf structure, as well as the presence of strong wind, can cause the reduction of the value of the data contained in table. TECHNICAL INFO Maximum power absorption (W) Duty cycle (cycles/hours) N. max cycles in 24h. Built-in capacitor (μF) Motor thermal protection (°C) Weight with packing (Kg) Protection level Operating temperature

SWING GATES EXAMPLE OF A TYPICAL INSTALLATION Art. 502L Electromechanical automations for swing gates Art. NET230N/C Universal digital control board for 1 or 2 operators, 230V with or without magnetic encoder (with box) Pair of adjustable (15°) surface mounted photocells Pair of aluminium columns for photocells, height 55 cm Keyswitch with two contacts, surface mounted. Supplied with 2 keys. Art. LED230AI Led flashing light 230V with built-in antenna 433MHz 2 channels remote control Black version art. TR2N also available (page 132) Warning sign

External unlocking device by cable (4,5m). To be used with BLINDOS Vertical fixing plate Safety enclosure to place external unlocking device handle Adapter kit for doors in slope Leaf up to 1,7m (Geko) or 2m (502) 150kg. - Max gradient 12% Anti-falling stainless steel cable with 2 holes for swing doors Galvanized steel rail sliding arm, right side (L. 800 mm) Painted galvanized steel articulated arm Art. 560BS Galvanized steel rail sliding arm, left side (L. 800 mm) For installation dimensions refer to instructions manuals Universal digital control board for 1 or 2 operators, 24V with or...