Sumpmaster
4Pages

Pump Controller APPLICATIONS • Underground carparks • Industry • Buildings • Homes and housing estates • Rainwater harvesting • Sewerage and water authorities Why choose thE DAVEY SumpMaster pump controller? Provides fully automatic pump control and protection via SumpMaster’s purpose built central controller module. Able to adapt to varying flow demand via the use of a choice of operating modes. Control of one or two pumps via float switches with standard options to control via probes or pressure switches. An alternate model with pneumatic sensing is also available. Programmable plain English menus, with security access code protection, enable quick and easy parameter adjustment to suit individual site conditions. Adjustable parameters include high and low level alarm delays, pump start rotation, control parameters, delay timers etc. System Status LCD display includes calculated flow (instantaneous and totalised flows), hour run per pump, number of starts meter for each pump, system starts for the last hour. Pump Controller Under conditions of varying flow demand, the Davey SumpMaster controller can control one or two pumps to empty or fill a sump or tank. With multiple selectable functionality and full alarm and BMS interface capability the SumpMaster Controllers are ideal for operating a broad range of pumps. System Protection includes adjustable high and low level shutdown settings with adjustable delay timers in order to protect pumps.

SumpMaster Pump Controller System Protection Alarms and fault resets can be accessed on site via the display screen, or via external communications. User definable automatic rotation of the lead pump in order to equalise the hours of operation to maximise pump life. System can be set to turn on all pumps in the event of a high level alarm; especially good in case the normal on/off floats are comprimised in some way. Pumps can be operated in manual mode for system commissioning and fault finding. 8 programmable inputs allow for external sensing functions, or remote control. 2 programmable...

SumpMaster Pump Controller MULTI-LEVEL SYSTEM OPERATION (Default Settings) Tank Empty Mode - Multi Level Should the level rise above cut in 1 point and a pump is started but this pump is unable to meet demand causing the level to rise above cut in 2 level, then cut in 2 timer is started and when cut in 2 timer elapses a second pump will start (If fitted and available). When the system level rises to system CUT IN 1 point the controller will start a cut in delay timer and if the level is still above CUT IN 1 point when the cut in timer expires then a pump is started. If the level does not...

SumpMaster Pump Controller RANGE GUIDE/SUITABILITY Single Phase Models in Plastic Enclosures Suit Davey Models Amps Range Three Phase Models in Metal Enclosures with Soft Starters DSM-HLOM Includes alarm mute & neon shut off davey.com.au | daveynz.co.nz This literature is not a complete guide to product usage. Further information is available from your Davey Dealer, Davey Support Centre and from the relevant product Installation and Operating Instructions. Must be read in conjunction with the relevant product Installation and Operating Instructions and all applicable statutory...