Sump Pumps WHY CHOOSE THE Davey Submersible Drainage Pumps? • Grey water pumping • Sump emptying • Septic effluent disposal • Water transfer • Pumping of light slurries and factory waste Semi vortex, open impeller, centrifugal design • Able to pump soft solids in suspension • Less susceptible to blockage D15VA and D15VAGMA models feature a special recirculation port to keep soft solids agitated in sump, improving ability to pump away such solids. D40VA Double mechanical shaft seal in oil bath with hard faced silicon carbide/ceramic seal on pump side (D15VA and D15VAGMA models have single seals) • Added motor protection • Long service life Sand slinger lip seal • Added protection • Long service life Submersible Drainage Pumps Model Numbers: D15VA, D15VAGMA, D25VA, D40VA Suitable for pumping clean or “grey water” of neutral pH containing up to 10% small soft solids or 1% fine solids. Some wear should be expected while pumping hard solids in suspension. Corrosion resistant 304 stainless steel motor shell, shaft, strainer and fasteners with a high quality paint finish • Long service life • Attractive, lasting appearance Automatic resetting thermal overload • Protected against overloading HO7RNF oil resistant leads, 10 metres long with 3 pin power plug • Easy to connect to power suppl

Sump Pumps MATERIALS OF CONSTRUCTION OPERATING LIMITS SUITABLE FLUIDS Clean or “grey water” of neutral pH containing up to 10% small soft solids or 1% fine solids. Some wear should be expected while pumping hard solids in suspension. ELECTRICAL DATA * Nominal supply voltage 220-240V, 50Hz single phase INSTALLATION & PRIMING Use a rope to position and retrieve the pump. Do not lower or retrieve the pump using the power lead as this may damage the cable entry seals, causing water leaks and unsafe operation. Don’t use this product for recirculating or filtering swimming pools, spas, etc. While these...