Catalogs >
DAVEY >
Remote Start Firefighter

Remote Start Firefighter
2Pages

Catalog excerpts

How does it work? To START: PROTECT YOUR Optional accessories Mobility kit Converts the Remote Start Firefighter from a stationary pump unit, into a mobile unit that is easily manouvered with wheels and handles. >>SMS start for when you are not home >>Heat sensors activate during bushfire threat >>Remote switch – like a panic button inside your home >>Electric start for easy key start operation HOME WHEREVER YOU ARE THIS BUSHFIRE SEASON >>Recoil start for emergencies if your battery is flat To STOP: Heat sensors Davey recommend the addition of heat sensors to buildings which have been fitted with external sprinklers. Heat sensors are calibrated to trigger at 93°C. This ensures the pump will start in an emergency independent of the phone network, as during severe fire conditions, SMS reception may be compromised. >>SMS STOP when you are not home >>Manual key switch for the times you’re at home There are fewer stopping options to ensure fail safe operation! Remember that the NEW Davey Remote Start Firefighter will send you an SMS to tell you whether it has STARTED or STOPPED! It doesn’t get much easier than that! Heat sensor installed Davey, helping you protect what’s most important. GET THE LEGENDARY DAVEY FIREFIGHTER NOW WITH REMOTE START! davey.com.au | daveynz.co.nz This literature is not a complete guide to product usage and must be read in conjunction with the relevant product Installation and Operating Instructions and all applicable statutory requirements. Product specifications may change without notice. ® Davey is a registered trademark of Davey Water Products Pty Ltd. © Davey Water Products Pty Ltd 2016.

Open the catalog to page 1

firefightet REMOTE START NEW Davey Remote Start Firefighter HYDRAULIC PERFORMANCE Why choose the Davey Remote Start Firefighter? For added security in a bushfire situation, or to eliminate travel time to a remotely located pump, the Davey Remote Start Firefighter provides a number of options for starting and stopping; manually, remotely via SMS or automatically. To activate the pump, you can either: I.Send an SMS START command to the Remote Start Firefighter to START the Firefighter on the pre-set speed you have selected, OR; 2.Utilise the automatic start facility either with a float switch...

Open the catalog to page 2