VIPMatch STD

Product catalog summary

Technical Specifications
The VIPMatch stadium seat features a steel chassis base and backrest covered with injection-moulded polyurethane foam, suitable for both indoor and outdoor use. The backrest rear shell and base lower shell are made from injection-moulded polypropylene, while the armrests are crafted from copolymer polypropylene. The seat's legs are secured with M8x60 mm fixing bolts, and the folding mechanism is supported by a screw-mounted swivel system and two springs.

Design and Recommendations
The seat is designed for use in football stadiums, arenas, sports pavilions, auditoriums, and leisure venues, adhering to UNE-EN13200-4 standards for severe public use. It is recommended for VIP areas and boxes, offering comfort and mobility in narrow tread installations. The design is neutral and suitable for high-profile venues, emphasizing style and user comfort. The seat is configurable to meet specific installation requirements and is manufactured using environmentally friendly materials and processes.

Dimensions and Variants
The seat is available in several variants, including VIPMatch STD, VIPMatch Soft, and VIPMatch Soft HB, with dimensions tailored to different needs. General dimensions include a width of 400 mm and a height of 850 mm.

Material and Durability
The seat's metal components are protected against corrosion with cataphoresis and powder coating, showing no oxidation after a 500-hour salt spray test. The polypropylene components are UV resistant, with light stabilizers to prevent degradation. The seat meets various fire safety standards across different countries.

Eco-Design and Sustainability
The product is designed for maximum transport efficiency and is made with a high percentage of recycled materials. It is low-maintenance, easy to clean, and 100% recyclable. The production process is solar-powered, and materials are chosen for durability and recyclability, with a focus on using recycled materials and collaborating with local suppliers.

Accessories and Customization
Accessories include aluminum seat numbering plates and custom embroidered logos. The upholstery is available in a wide range of colors for both indoor and outdoor use, tailored to project requirements.

Catalog excerpts

COMMERCIAL TECHNICAL DATA SHEET 2025/07 GENERAL DESCRIPTION Folding stadium seat for general audience, VIP areas, and boxes. Recommended for sports facilities or arenas with narrow tread installations, maintaining a high level of comfort and the necessary space for comfortable mobility, access, and safety. Neutral and sober design, it’s the perfect choice for highproﬁle venues that prioritize both style and user comfort. Manufactured with environmentally friendly materials and sustainable processes. Conﬁgurable to meet the speciﬁc requirements of each installation. Level 4 Severe public use according to UNE-EN13200-4 Bahrain Victorious Nuevo Arcángel Stadium Córdoba CF - Spain. Football stadiums Arenas and Sports Pavilions Auditoriums and leisure venues TECHNICAL DESCRIPTION Base and backrest made of steel chassis covered with injection-moulded polyurethane foam, upholstered with fabric suitable for indoor & outdoor use. Backrest rear shell and base lower shell made of injection-moulded polypropylene.Armrests made of copolymer polypropylene by injection moulding. Upholstered end sides. Legs are ﬁxed to the tread with two ﬁxing points (M8x60 mm ﬁxing bolts). The shaft integrated into the seat base ﬁts into a screw-mounted swivel system on the support, allowing the seat to fold up. The swivel mechanism is made of copolymer polypropylene through injection moulding. Folding action is assisted by two springs. Daplast S.L | Ctra. Palma del río Km9 | 14005 Córdoba Spain | +34 957 329 448 | da

Open the catalog to page 1

COMMERCIAL TECHNICAL DATA SHEET 2025/07 VIPMatch Soft GENERAL DIMENSIONS Daplast S.L | Ctra. Palma del río Km9 | 14005 Córdoba Spain | +34 957 329 448 | [email protected]

Open the catalog to page 2

Open the catalog to page 3

COMMERCIAL TECHNICAL DATA SHEET 2025/07 STD / Soft HIGH BACKREST Daplast S.L | Ctra. Palma del río Km9 | 14005 Córdoba Spain | +34 957 329 448 | [email protected]

Open the catalog to page 4

COMMERCIAL TECHNICAL DATA SHEET 2025/07 Metal corrosion protection by cataphoresis and powder coating paint ﬁnish. No signs of base metal oxidation after 500-hour salt spray chamber test (UNE EN ISO 9227). UV resistance. Light stabilizers for polypropylene protect the material from degradation caused by solar radiation and other environmental factors, extending the product’s service life. Masterbatches for polypropylene offer high resistance to light and temperature. Accelerated aging tests carried out according to European Standard EN ISO 4892-2 (CIELAB color model). METAL COATING S235JR grade...

Open the catalog to page 5

ECO-DESIGN MATERIALS Responsible design of products and processes that considers the product's life cycle. Materials are chosen to enhance durability and recyclability, prioritizing the use of recycled materials. Prioritising collaboration with local suppliers. Maximum optimization of energy use. Part of our energy consumption comes from solar power generated by photovoltaic panels installed at our facilities. Latest generation machinery and electric vehicles within the factory. Our products are designed to offer a long lifespan. They are certified for safety, mechanical resistance, and durability...

Open the catalog to page 6