DanVex AD-200

Product catalog summary

Overview: The DanVex AD-200 is a compact adsorption dehumidifier designed for cold and low-humidity environments where traditional refrigerant units are inefficient. It operates using an adsorption rotor, making it suitable for spaces like cold storage, server rooms, archives, and laboratories.

Key Features:

Adsorption drying technology allows operation below freezing and at low relative humidity without the need for condensate drainage.
Single-phase power supply compatible with standard 220–230 V outlets.
Quiet operation with noise levels below 45 dB(A), suitable for occupied spaces.
Dual-fan design for separate process and regeneration airflows, enhancing drying efficiency.

Specifications:

Drying capacity: 0.6 kg/h at 20 °C / 60% RH.
Operating temperature range: −20 to +40 °C.
Process airflow: 180–200 m³/h; Regeneration air: 60 m³/h with 50 Pa static pressure.
Power consumption: 1.2 kW with a current of 6 A.
Dimensions: 442 × 292 × 678 mm; Net weight: 28 kg.
Housing made of AISI 304 stainless steel with EU3 filters.

Installation & Connections:

Designed for ducted, stationary installation indoors or outdoors with IP-rated housing.
No condensate drain required; moisture is expelled with regeneration exhaust air.
Electrical supply requires a dedicated circuit; connection by a certified electrician.
Includes a digital controller with temperature/humidity sensor and Modbus RTU RS-485 interface for BMS/SCADA integration.

Model Range:

AD-200: 0.6 kg/h drying capacity, 180–200 m³/h process airflow.
AD-400: 2.2 kg/h drying capacity, 400 m³/h process airflow.
AD-550: 3 kg/h drying capacity, 550 m³/h process airflow.

Additional Notes: Specifications and dimensions are subject to change. Verify critical dimensions against the installation manual before design work. Drying capacity is measured at 20 °C / 60% RH.

Catalog excerpts

DanVex AD-200 Adsorption dehumidifier · 0.6 kg/h · single-phase Compact desiccant dehumidifiers for cold and low-humidity spaces where refrigerant units lose efficiency. They dry the air with an adsorption rotor rather than condensation — working below freezing, reaching very low target humidity, and needing no condensate drainage. Quiet enough for occupied rooms, archives and laboratories. Cold storage Server rooms Small pharma rooms Archives & museums Specialty manufacturing Adsorption (desiccant) drying — works below freezing and down to very low RH where condensation units cannot No condensate drainage — moisture is carried out on the regeneration airstream — no condensate to plumb Single-phase supply — standard 220–230 V outlet; compact cabinet for tight installations Ducted by design — process and regeneration ducts attach to the cabinet, integrated into the room air layout Quiet operation — from < 45 dB(A), suitable for occupied rooms, labs and archives Dual-fan design — separate process and regeneration fans for maximum drying efficiency Drying capacity (20 °C / 60% RH) Operating temperature range Working range Process airflow Regeneration air / Static pressure Power / current Voltage / Frequency Regeneration Noise level (1 m) © 2026 DanVex · Industrial & Professional Climate Control Process duct in/out Regen duct in/out BMS protocol Dimensions (L×W×H) Package size (L×W×H) Gross weight Filters Housing

Open the catalog to page 1

DIMENSIONS & VIEWS Dimensions in mm. end panels with process and regeneration air connections, front view, plan view. UNIT L×W×H DUCTS PROCESS · REGEN Adsorption unit, AISI 304 stainless steel housing, with process and regeneration air filters fitted Digital controller External humidity sensor (hygrostat) Modbus RTU RS-485 interface I N S TA L L AT I O N & C O N N E C T I O N S Ducted, stationary installation indoors or outdoors (IP-rated housing); place on a level surface with access to the control panel and filter. Duct connections Two separate air circuits: process air in/out (dry air to the...

Open the catalog to page 2

DanVex AD-200

DanVex AD-200

Catalog excerpts

All DanVex catalogs and technical brochures