Aluminium supporting structure system for mechanical services equipment on a flat roof

Description of the system Sherpal is an aluminium supporting structure system for mechanical services equipment on a flat roof. It can be used for items of equipment such as a fan motor, air handling unit, etc. It is fixed to the concrete roof slab through the roof covering. + Available from stock and tested (snow and wind calculations available) 4-post module overall dimensions: 1,500 x 1,500 mm + Three-point to facilitate fixing + Compatible with the changes to the thermal regulations Field of application The Sherpal system can be used in the following situations: ● 6-post module overall dimensions:...

The posts Dimensioned according to the thickness of the roof covering and the width of the equipment to be fixed. The aluminium sleeve-plate units Pre-coated with bituminous primer for making good up to the roof covering. The thermo-plastic collar Forming a flashing, to terminate the roof covering. The beams Supplied in lengths of 1,500 mm or 3,000 mm to suit the selected layout. Supplied in lengths of 1,500 mm. 2 per module (or more, depending on the size and the number of items of equipment to be fixed) 1 Post 2 Beam Width of the equipment 5 Upper sleeve-plate unit 6 Bottom sleeve-plate unit A...

dani alu UK Ltd. Hexagon House, Avenue Four Witney, Oxfordshire, OX28 4BN Phone: 01865 595160 Fax: 01865 595161 E-mail: [email protected] www.danialu.com Company / Address / Company stamp :.. Site reference : .. Request for quotation Equipment : Nature of the equipment to be fixed: Characteristics of the roof slab: Roof covering h1 (mm) Slope (degrees) Roof covering: © 10/2012 dani alu • Subject to modifications.• 11.0197• Druckerei Stein Additional module Additional cross-beam Bottom sleeveplate unit Upper sleeveplate unit Patented system. Registered trade marks and designs. Examples of use...