Data Sheet SpeedUp Heat Panels Application SpeedUp heat panel CZ SpeedUp heat panel EZ SpeedUp aluminium header panel EZ (accessory) SpeedUp header panel CZ SpeedUp header panel CO SpeedUp blank panel BP The SpeedUp heat panel is part of a universal and optimum underfloor heating system for all new and old buildings. It is suitable for renovation, extensions and use in dry installation. The Danfoss 16 x 2 mm composite pipe laid into the Danfoss SpeedUp heat panels at laying distances of between 125 mm and 250 mm allows for a tailored output. The composite pipe is fastened and fixed into the specially formed pipe channels (Ω-shaped) of the prefabricated aluminium clad heating slats. Maximum value for surface roughness in mm with measuring distances in m Line 4 Prepared floors with extra requirements, e.g. with uneven filler SpeedUp heat panel comfort zone, CZ SpeedUp heat panel edge zone, EZ SpeedUp header panel, CZ SpeedUp header panel, EZ SpeedUp header panel, CO SpeedUp blank panel, BP

SpeedUp heat panel Aluminium 0.5 mm, with pipe channels (Ω-shaped), crimped Thermal conductivity Water vapour diffusion factor Compressive strength Building classification SpeedUp aluminium heating plate SpeedUp load bearing steel SpeedUp alu. header panel CZ SpeedUp alu. header panel EZ SpeedUp perimeter insulation System foil Support batten Threshold support batten This product contains a substance included on the candidate list according to article 59 (1,10) of regulation EC No. 1907/2006 (‘REACH’) in a concentration above 0.1% w/w: flameproofing agent, hexabromocyclododecane. HBCD is also...