Data sheet Temperature Sensors Types MBT 5250, MBT 5260 and MBT 5252 Heavy-duty temperature sensors for controlling cooling water, lubrication oil, hydraulic oil and refrigeration plants within general industry and marine applications. These temperature sensors are based on a standardized Pt 100 or Pt 1000 element, which gives a reliable and accurate measurement. All three sensor types can be delivered with NTC / PTC elements on request. In the low temperature version (-50 – 200 °C) the measuring insert is based on a silicone cable, which makes the sensor very resistant towards vibrations. The MBT 5250 with changeable measuring insert and MBT 5260 with fixed measuring insert are equipped with EN 175301-803-A, Pg 9 as standard. The MBT 5252 is equipped with a B-head as standard, but can also be delivered with B-mini Head on request. If needed, a transmitter (MBT 9110) can be ordered as an integrated part of the MBT 5252 sensor. MBT 5250 MBT 5260 • Gaseous or liquid media, e.g. air, gas, vapour, water or oil. • Up to 200 °C media temperature (MBT 5250 and MBT 5260) • Up to 200 °C or 400 °C media temperature (MBT 5252) • Pt 100 or Pt 1000 sensing element • Can be used with 2- or 3-wire connections • Gold plated male and female connector (MBT 5250 and MBT 5260) • MBT 5250 and MBT 5252 with interchangeable measuring insert • MBT 5260 with fixed measuring insert • Available with built-in transmitter (MBT 5252) Lloyds Register of Shipping, LR Germanischer Lloyd, GL Det Norske Veritas, DNV Registro Italiano Navale, RINA Nippon Kaiji Kyokai, NKK American Bureau of Shipping, ABS Korean Register of Shipping, KR Bureau Veritas, BV China Classification Society, CCS

Electrical Connections EN175301/803 excl. female plug EN175301/803 plug Pg 9 (IP65) EN175301/803 plug Pg 11 (IP65) EN175301/803 plug Pg 13,5 (IP65) ITT Canon 4 pins Au EN175301/803 GL. plug Pg 13,5 (IP65) Sn pins EN175301/803 Pg 9-4 pins without earth (IP65) EN175301/803 Pg 11-4 pins without earth (IP65) Other

Technical data Max. temperature (Ext. length "None") Max. load on protection tube Tm = Media temperature T = Temperature for electric plug TA = Ambient temperature Note: for extension length = 50 mm no limitations up to 200 °C media temperature and 90 °C ambient temperature Process connection Dimensions MBT 5250, MBT 5260 A = Extension length B = Insertion length C = Protection tube D = Process connection E = Union Please note: • Tightening torque for the mounting screw at the rear end of the electrical connection plug: 25 Ncm • Tightening torque for the union (position "E"): 17 Nm Electrical...

Temperature range 220 °C = 22 Temperature range 150 °C = 15 1. digit defines 100's 2. digit defines 10's Transmitter setting, end of range ...0 °C (or none) Data sheet | Temperature Sensor, Types MBT 5250, MBT 5260 and MBT 5252Ordering standardType MBT 5252Measuring range, sensor element -50 - 200 °C -50 - 400 °C Sensing element 1 X Pt 100 2 X Pt 100 (-50 - 200 °C) 1 X Pt 1000 2 X Pt 1000 (-50 - 200 °C) Protection Tube, W.nr. 1.4571 (AISI 316 Ti) Acid-proof steel, 08 mm (-50 - 200 °C) Transmitter setting, start of range None _ 0 °C _-50 °C Other Transmitter type As terminal block None Standard...

Max. load on protection tube according to DIN 43763 Process connection

Electrical connections With temperature transmitter Without temperature transmitter 1 x Pt100 Without temperature transmitter 2 x Pt100 Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfbss reserves the right to alter its products without notice.This also applies to products already on order provided that such alterations can be made without subsequential changes being necessary in specifications already agreed. All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks...