Catalogs >
DANFOSS >
MBC 8000 and MBC 8100

MBC 8000 and MBC 8100
5Pages

Catalog excerpts

ENGINEERING TOMORROW Data sheet Thermostat MBC 8000 and MBC 8100 MBC 8000 and MBC 8100 thermostats designed for use in severe industrial and marine applications where space and reliability are the most important features. MBC 8100 have all international marine approvals. The MBC thermostats are designed according to our block design to survive in the harsh conditions known from machine rooms among others. MBC 8000 and MBC 8100 have high vibration resistance. Features • Compact design • Resistance to shock and vibration • A high level of enclosure • Low differential and high repeatability • Robust and reliable construction CE marked acc. to EN 60 947-1, EN 60 947-4-1, China Compulsory Certificate, CCC EN 60 947-5-1 Ship approvals, Det Norske Veritas, DNV type MBC 8100 only American Bureau of Shipping, ABS Lloyds Register of Shipping, LR Germanischer Lloyd, GL Bureau Veritas, BV Registro Italiano Navale, RINA Nippon Kaiji Kyokai, NKK Korean Register of Shipping, KR Russian Maritime Register of Shipping, RMRS China Classification Society, CCS

Open the catalog to page 1

Data sheet | Thermostat, MBC 8000 and MBC 8100 Technical data Contact load (Alternating current) Environmental conditions Driftsbetingelser Umgebungsbedingungen Ambient temperature Shock resistance: resistance Vibration resistance *) If higher vibrations are present in the system/installation, temperature controls with capillary tube or armoured capillary tube are recommended. Mechanical characteristics DIN 43650 plug, Pg 9, Pg 11, Pg 13.5 Electrical connection Input Input Normallyclosed (NC) Normally closed (NC) Normallyopen (NO) Normally open (NO) Connected to enclosure Connected control...

Open the catalog to page 2

Ordering of customized types MBCI i i i Ship Approved Thermostat Capillary tube Armoured capillary tube Length Capillary tube length [mm] Rigid sensor pocket length [mm] Other Electrical connection • No plug ■ Pg 11 plug (DIN 43650) ■ Pg 13.5 plug (DIN 43650) ■Pg 9 plug (DIN 43650) Other Accessories Part

Open the catalog to page 3

Setting point correction The sensor on MBC 8100 thermostat contains an adsorption charge. Therefore its function is not affected whether the sensor is placed warmer or colder than the remaining part of the thermostatic element (bellows and capillary tube). However, such a charge is to some extent sensitive to changes in the temperature of the bellows and capillary tube. Under normal conditions this is of no importance, but if the thermostat is to be used in extreme ambient temperatures the setting point might change. The deviation can be compensated for as follows: Setting point correction...

Open the catalog to page 4

ENGINEERING TOMORROW Installation MBC thermostats are designed to withstand the shocks that occur, e.g. in ships, on compressors and in large machine installations. MBC thermostats with remote sensor are fitted with 5 mm screws to bulkheads or similar. See fig. 2 MBC thermostats with rigid sensor are self-supporting from the sensor pocket. For permissible media pressure see fig. 3. Sensor position As far as possible the sensor should be positioned so that its longitudinal axis is at right angles to the direction of flow. The active part of the sensor is 013 mm x 50 mm long on thermostat...

Open the catalog to page 5

MBC 8000 and MBC 8100 5Pages

Catalog excerpts

All DANFOSS catalogs and technical brochures

MBC 8000 and MBC 8100
5Pages