ISO IGLU'
8Pages

Ribbed slab foundation with continuous insulation for underfloor heating and cooling systems

Ecological, environmentally friendly Energy savings SWITCHBOARD Telephone +39 0422 2083 Fax +39 0422 800234 FOREIGN COMMERCIAL SECRETARY OFFICE export@daliform.com TECHNICAL SECRETARY OFFICE tecnico@daliform.com

Efficient thermal insulation must be able to keep heat inside buildings during the winter and protect against solar heat in the summer. To reduce the thermal flow between two spaces at different temperatures and improve the energy performance of buildings: create a building envelope with low thermal transmittance, use insulating materials, avoid thermal bridges, check airtightness and adjust ventilation. For these reasons, combined use of Iglu’® Plus and Iso Iglu’® is the ideal solution for efficiently insulating buildings from external agents such as humidity, heat and the cold, thereby...

ISO icur Advantages • Iglu'" Plus can be rested directly on the levelled soil, without needing to cast any lean concrete. • It is easy to lay as Iglu'" Plus is light and simple to interlock together. • Pedestrian access is possible during casting. • Systems can transit inside the preset orthogonal channels in the top part of the EPS panels, which will then be buried in the reinforced concrete slab foundation. • A continuous hollow cavity is created under the flooring. • The risk of breakage caused by deformation of the terrain (for example swelling clays) is eliminated, thanks to the...

1 Prepare the surface by compacting the soil substrate. Lay the 2 Lay the Iso Iglu’® panels in EPS, taking care to position them so 3 Lay any pipe coils for the underfloor heating and cooling system, 4 Lay the finishing slab foundation reinforcements and the interlocking male/female formworks directly on the ground, from left to right and top to bottom, ensuring that the pre-printed arrow on the Iglù® Plus cap is facing upwards. fastening them to the Iso Iglu’® panels using the relevant clips for radiant underfloor heating systems. Any other system pipes can be inserted inside the...

Comparison between a ventilated underfloor cavity with Iso Iglu’® and a traditional underfloor cavity H 27 cm The benefits are the same for underfloor heating too. Flooring Screed (th. 6 cm) Extruded polystyrene panel (th. 10 cm) Isocal formworks screed with transit for systems (th. 8 cm) Finishing slab foundation in reinforced concrete (th. 5 cm) 56 cm Ventilated underfloor cavity with Iglu’® Plus H 27 cm Lean concrete Soil Flooring Isocal formworks screed (th. 4 cm) Finishing slab foundation in reinforced concrete (th. 5 cm) Iso Iglu’® with transit for systems (th. 10 cm) 46 cm ®...

The information contained in this catalogue could be changed. Before placing an order, request a confirmation or updated information from the DALIFORM GROUP, which reserves the right to make changes at any moment without notice. In consideration of recycled material, it is specified that there are tolerance margins caused by environmental factors.

Tel. +39 0422 2083 - Fax +39 0422 800234 export@daliform.com - www.daliform.com Via Postumia Centro, 49- 31040 Gorgo al Monticano (TV) - Italy Certified Management System UNI EN ISO 9001, UNI EN ISO 14001, BS OHSAS 18001, SA 8000