*myarchiexpo

OUTDOOR

Product catalog summary

Overview
This document provides a detailed overview of Dakota's outdoor flooring solutions, focusing on supports for raised floors. These products are designed to meet diverse design, stylistic, and structural needs, offering versatility, sound insulation, and ease of installation.

Product Categories

Supports for Raised Floors: Dakota offers various supports such as Fix Tile Support, ARKIMEDE Line, 3D-Scopic Supports, Hercules, and Level-Up. These are engineered to handle high loads and allow easy adjustments post-installation.
Fix Tile Support: An economical solution for exterior tiles, made from recycled polypropylene, adjustable with levelers and anti-noise rubber shims.
ARKIMEDE Line: Adjustable supports for raised floors or decking, available in different models for various height requirements, with accessories for lateral finishing, slope compensation, and noise reduction.

Technical Specifications

Fix Tile Support: Height of 14 mm, diameter of 155 mm, can be split into four pieces, supports additional levelers, and includes an anti-noise rubber option.
ARKIMEDE Models: Heights range from 10 mm to 115 mm, with self-leveling capabilities for slopes up to 5%.

Environmental Commitment
Dakota emphasizes eco-sustainability by using recycled materials and self-produced photovoltaic energy, aiming to reduce energy consumption and CO2 emissions.

Installation and Usage
Guidelines emphasize referring to technical data sheets and manufacturer instructions. Supports are suitable for various tile sizes and configurations, ensuring proper drainage and noise reduction.

Specifications

Anti-noise Rubber Shim: Diameter 110 mm, thickness 3 mm, made of EPDM rubber, not compatible with ARKIMEDE 10.
Insulation Noise Reducer: Sound-absorbing rubber mat for ARKIMEDE telescopic support, reduces noise by up to 12 dB.
Anti-noise Rubber Pad for Tiles: Diameter 130 mm, thickness 2 mm, made of thermoplastic rubber, includes removable tabs for grout lines.

Procedures

Installation: Designed for use with ARKIMEDE and 3D-Scopic support heads for paving, except ARKIMEDE 10.
Substructure Creation: Use Magnelis® coated steel joists and Keradeck® aluminum joists with ARKIMEDE supports for outdoor decking and paving.

Standards and Recommendations

Spacing: Recommended spacing for ARKIMEDE supports on Magnelis® joist is 50 cm.
Material Use: Magnelis® provides exceptional corrosion protection, suitable for hostile environments.

Accessories

Plastic Kit for Lateral Finishing: Includes plates and clips for perimeter finishing with ARKIMEDE supports.
Stainless Steel Clips: For perimeter finishing in the absence of a lateral wall, compatible with ARKIMEDE supports.

Key Data from Tables

Product Codes: Various codes provided for different products and accessories, indicating dimensions, packaging, and pallet quantities.
Material Composition: Products made from materials like EPDM, TPV, thermoplastic rubber, polypropylene, and aluminum.

Critical Information

Compatibility: Certain products are not compatible with ARKIMEDE 10.
Noise Reduction: Products designed to reduce walkover noise significantly, enhancing the acoustic comfort of outdoor flooring installations.

Additional Products

Universal Joist Head for Arkimede: Facilitates decking solutions, accommodates various joists, and increases support height by 12mm.
Rubber Pad for Joist: Thermoplastic rubber pad, 8mm thick, used as a base for joist installation.
Protective Joist Tape: Stretch polyethylene adhesive tape for protecting and waterproofing joists.
Decking Spacer: Ensures precise joint spacing and optimal expansion management for decking boards.
Adjustable Joist Support: Ideal for minimal elevation height decking installations, preventing rot in wooden joists.
Magnelis® Coated Steel Joist and Adapter: Ensures secure substructure creation for outdoor decking or paving.
Keradeck® Aluminum Joist and Adapter: Aluminum joist system for decking and paving, compatible with ARKIMEDE supports.
3D-Scopic Supports: Adjustable height and self-leveling capabilities, supporting high loads up to 5,000 kg.
Universal Clips for Lateral Finishing: Stainless steel clips for perimeter finishing in floating floor installations.
Universal Clips for Lateral Laying: Prevent tile-wall contact, accommodating movements and dilatations.

Level-Up System
A modular system for external raised flooring, offering easy assembly, versatility, and high safety standards. It allows for quick tile replacement and access to underlying elements, supporting space evolution without compromising functionality.

Specifications

Material: Made from high-performance plastic material (HDPE) and reinforced with galvanized steel profiles.
Eco-Friendly: Produced using recycled materials and self-produced photovoltaic energy.
Safety: Patented anti-falling system ensures safety even if tiles break.

Components

Laying module, fixing head, adjustment screw, support base, and reinforcement profile.
Available extensions: 25 mm and 50 mm.
Insulation noise reducer available.

Installation
Rapid and modular installation with adjustable height supports, compatible with various tile sizes. Recommended use of central support in the laying module for each tile size.

Accessories
Lateral finishing clips and aluminum profiles for perimeter finishing, outdoor spacers, and cross-shaped spacers for tile alignment.

Additional Products
Quix System for invisible fixing of decking, Georeef landscape profiles, and non-woven fabric for high resistance and water permeability applications.

Usage
Level-Up is ideal for creating a stable and safe raised floor for outdoor environments, allowing for easy maintenance and adaptability to changing space requirements.

Galvanized Steel Water Box
Designed for outdoor use, made of stainless steel, available in various sizes.

Electricity Inspection Box
Houses electricity meters, featuring anti-condensation protection and a double bit lock, made of polyester resin.

Box for Gas Meter
Available in galvanized and stainless steel, designed to house gas meters with ventilation slots.

Back Hatch for Gas Meter Box
Complements gas meter boxes, made of galvanized or stainless steel.

Chamfers and Spacers for Construction
Made of thermoset plastic, used in construction to maintain formwork distances and prevent concrete detachment.

Draining Water Outlet
Made of TPE and PVC, designed for vertical rainwater evacuation on flat roofs.

Leaf-Grate
Universal leaf-grate made of polypropylene or galvanized steel, prevents obstruction from leaves and debris.

Draining Water Outlet Types
Round and square outlets made of TPE for complete rainwater evacuation on roofs.

Open and Closed Plastic Composite Top Drainers
Drip systems for balconies and overhanging elements, made of plastic composite, impermeable to liquids, frost-resistant, and weather-resistant.

Open and Closed Marble Composite Top Drainers
Similar to plastic composite drainers but made of marble composite.

Additional Information
The document also mentions a range of indoor solutions including door frames, tile leveler systems, and luxury vinyl tiles.

Catalog excerpts

DAKOTA outdoor products for external.

Open the catalog to page 1

Products for flooring Fix_tile_supportO_136 ARKIMEDE_LineO_138 3D-Scopic_SupportsO_162 HerculesO_170 Level-UpO_180 Outdoor spacer for tiles O_189 Quix System and Georeef O_191 Non-woven fabric and artificial turf O_193 Dak-Rock and Dak-Rock Heavy O_195 Green Plus and plastic tiles O_197 Ventilation grilles ABS ventilation grillesO_201 Aluminum ventilation grillesO_205 Copper ventilation grillesO_206 Doors and boxes Hatch for gas-water and retractable hatchO_207 Water and gas hatchO_208 Electricity inspection boxO_212 Back hatch O_213 Accessories for concrete Chamfers and chamfers finned for pillarsO_214...

Open the catalog to page 3

ADJUSTABLE SUPPORTS FOR RAISED FLOORS The ideal solutions for any need.

Open the catalog to page 4

Thanks to continuous research and technological innovation, which has always been the basis for the development of new products, DAKOTA now has different lines of Supports for Raised Floors with unique and specific characteristics for every need! The Supports for Raised Floors have been designed to support high load, combining versatility, sound insulation, ease of installation and adjustment even when the floor has already been laid. Thanks to the extraordinary advantages offered in terms of functionality and versatility, Dakota's proposal meet every design, stylistic and structural need: installers,...

Open the catalog to page 5

N° of supports per sqm (average incidence) These values derive from a pure mathematical calculation, based on the hypothesis of an infinite terrace without a perimeter and without considering the potential installation variables, such as scraps and areas with different situations than expected in the design phase. These are purely indicative values, also considering that the smaller is the terrace, the greater is the need for supports per m2. Therefore, starting from what is indicated in the table, we invite you to increase the quantities by about 10%. estimated calculation without central support...

Open the catalog to page 6

Instructions for various format with supports in raised installation ! The layouts shown above are purely indicative. It is advisable to refer to the technical data sheet of the tile and / or the manufacturer's instructions for use and installation before installation.

Open the catalog to page 7

Fix tile support "The most requested solution in the market, practical and economical. The best option for a flooring that requires a fixed support" The fix support is the ideal solution for the laying of exterior tiles (tipically concrete tiles) in outdoor environments (balconies, terraces, roof tops, patios, etc.). The height of the support is 14 mm, thickness of joints 4 mm and diameter 155 mm. It is pre-cut to be easily divided up to 4 pcs. The 1 and 3 mm levelers disc can be added to the support for a perfect adjustment of the installation height. Furthermore, it is possible to combine it...

Open the catalog to page 8

Outdoor | Products for flooring TER09-1147/G Anti-noise rubber shim DESCRIPTION Fix tiles support for the laying of the exterior tiles. Height 14 mm (overall dimensions 28 mm) and diameter 155 mm. It can be splitted up in 4 pieces and can be added 1 or 3 mm levelers. MATERIAL Made of recycled PP (polypropylene). USE This product allows the laying of exterior tiles (tipically cement tiles) in outdoor environments (balconies, terraces, roof tops, patios, etc.) with a height of 14 mm. The use of 1 or 3 mm additional levellers allows to reach higher heights. Anti-noise rubber shim 1 mm

Open the catalog to page 9

the complete range. 100% MADE IN DAKOTA ARKIMEDE is a family of adjustable supports that allows the laying of raised floors or decking with an excursion from 10 mm (ARKIMEDE 10). ARKIMEDE Line consists of 6 models: • ARKIMEDE 10 from 10 mm; • ARKIMEDE 18 from 18 mm; • ARKIMEDE 35 from 35 mm; • ARKIMEDE 41 Self-leveling up to 5% slope -from 41 mm; • ARKIMEDE 60 from 60 mm; • ARKIMEDE 115 from 115 mm. Each support is supplied pre-assembled in its 3 elements: a base (surface 314 cm2), a rotating ring for height adjustment and a head (both fixed and self-leveling) for paving (2 or 4mm joint) and...

Open the catalog to page 10

“The most complete innovation to reach all heights and to optimize the stock” ARKIMEDE 10 Rubber shim, the (almost) mandatory accessory! Head for paving and decking Ring nut for a millimeter lateral adjustment Base with grooves for the outflow of water and pre-cuts for side installation

Open the catalog to page 11

Outdoor | Products for flooring ARKIMEDE PAVING LINE Code ARKIMEDE 41 - Self-leveling paving 2 mm ARKIMEDE 41 - Self-leveling paving 4 mm

Open the catalog to page 13

Outdoor | Products for flooring TER09-1147/4A2M ARKIMEDE 10 paving 2 mm from 10 to 20 30 pcs. TER09-1147/4A4M ARKIMEDE 10 paving 4 mm from 10 to 20 30 pcs. Code Product height (mm) Pkg. Pallet UM TER09-1145/4A2M ARKIMEDE 18 paving 2 mm from 18 to 36 30 pcs. TER09-1145/4A4M ARKIMEDE 18 paving 4 mm from 18 to 36 30 pcs. ARKIMEDE 35 AND 41 SELF LEVELING PAVING Ref. Code Product height (mm) Pkg. Pallet UM TER09-1143/4A2M ARKIMEDE 41 paving Self-leveling 2 mm ARKIMEDE 41 paving Self-leveling 4 mm Code Product height (mm) Pkg. Pallet UM TER09-1163/4A2M ARKIMEDE 115 PAVINGRef. Code Product height (mm)...

Open the catalog to page 14

Outdoor | Products for flooring ARKIMEDE LINE ACCESSORIES - PAVING Ref. Clever for ARKIMEDE Slope 1% Clever for ARKIMEDE Slope 3% Clever for ARKIMEDE Slope 5% Anti-noise rubber shim for ARKIMEDE 10 Anti-noise rubber shim for ARKIMEDE Anti-noise rubber shim for ARKIMEDE TER09-1144 Insulation Noise Reducer TER09 -1144/P Insulation Noise Reducer Plus TER09-1144/T Round Insulation Noise Reducer 0 200 thick. 3 30 pcs. Kit of 10 plates, 10 lateral TER09-1152/3BPL* supports and 30 tile fixing clips for lateral finishing Base clip for vertical finishing 10 mm Head clip for vertical finishing 10 mm Base...

Open the catalog to page 15

PAVING SELF-LEVELING HEAD FOR ARKIMEDE h. 14 mm TER09-1142TB2 Self-leveling Head paving 2 mm 0 120 mm ARKIMEDE Self Leveling is an accessory for the ARKIMEDE support that connects with the ARKIMEDE support. It can be matched with all ARKIMEDE Paving Line. The installation on the head of the support can be made once the wings are removed. The installation of the self-leveling head increase the total height of the support of 14 mm. It guarantees a leveling on 0% to 5% slopes. MATERIAL Made of recycled PP (polypropylene). USE Used in external areas, terraces, pavements. CLEVER - SLOPE REGULATOR...

Open the catalog to page 16

OUTDOOR

OUTDOOR

Catalog excerpts

All DAKOTA catalogs and technical brochures

Archived catalogs