ANCHORING SYSTEM FOR INSULATION PANELS
8Pages

ANCHORING SYSTEM FOR INSULATION PANELS

ANCHORS FOR ETICS SYSTEM Percussion or screw-in 8 mm hole anchors, with pre-mounted nail. 60 mm head with improved adhesion and expansion nail. Compliant with ETAG014 and CAM certified. They are used for mechanical anchoring of insulation and mineral wool panels, installed on the main types of masonry, supporting their load and tensile stress “tearing”. The preassembled nail facilitates and speeds up the installation of the anchors savings time in installation. Advantages of Dakota’s SGR line: • Main features: • Pre-assembled nail, for a faster installation. • Variable section of the...

UNIVERSAL HELICOIDAL ANCHORS Anchor with 67 mm helical body with integrated expansion body 0 8 mm and fixing screw (torx 30). A single size for panels from 100mm up to 400mm thickness, applicable on various types of insulation: • PUR • Mineral wools • EPS • Phenolic resin The product guarantees the absence of thermal bridge (Value 0.000W / K) and can be used both on new buildings and on the renovation of existing buildings, compliant with EAD 330196-01-0604 and can be used on supports of classes A, B, C, D and E. The anchor is made of PA (polyamide), expansion body in PP and fixing screw in...

SGR-PAPOLYAMIDE HAMMERING NAILTERll-3110 TERT1-3250 Hammering anchor hole 8 mm, with pre-assembled polyammide nail into the anchor's body. Anchor sizes range is from 110 to 250 mm, for mechanical fastening of insulation panels with thicknesses ranging from 60 to 210 mm. The diameter of the head is 60 mm with improved adherence and green PA expansion nail. It complies to EAD 330196-01-0604 Body and head made of PP (polypropylene), nails made of polyamide (PA).

STEEL HAMMERING NAIL TER11-3110AP Hammering anchor hole 8 mm, with pre-assembled steel nail into the anchor’s body. Anchor sizes range is from 110 to 310 mm, for mechanical fastening of insulation panels with thicknesses ranging from 60 to 260 mm. The diameter of the head 60 mm with improved adherence and white PA nail cap.. It complies to EAD 330196-01-0604. Body and head made of PP (polypropylene), nails made of steel and nail cap in polyamide (PA). ISO 14025 THIRD PART VERIFIED

SGR-AV STEEL SCREW TER11-3110AV TER11-3310AV Hammering anchor hole 8 mm, with pre-assembled steel screw into the anchor's body. Anchor sizes range is from 110 to 310 mm, for mechanical fastening of insulation panels with thicknesses ranging from 60 to 260 mm. The diameter of the head is 60 mm with improved adherence and torx-ready (Torx 30) yellow PA nail cap. It complies to EAD 330196-01-0604. Body and head made of PP (polypropylene), screw made of steel and nail cap in polyamide (PA). EPD ISO 14025 THIRD PART VERIFIED

SGR-AV FLATFLAT-HEAD STEEL SCREW ANCHOR TER11-3115AVF -> TER11-3235AVF 8 mm screwable plug with 60 mm flat head for flush or concealed use, with a double-threaded screw pre-mounted in the plug shaft. The dowel can be automatically inserted during fixing and then covered with EPS, EPS Graphite or Mineral Wool plugs. Anchorage depth > 25 mm or flush-mounted and then covered with the polymer plug supplied with the plug.Shank and ferrule made from PP (polypropylene), steel screw.Used for mechanically anchoring insulation panels to all main types of masonry, supporting the load and tensile...

DAKOTA DAKOTA GROUP S.A.S. REGISTERED OFFICE Via Pitagora, 3 HEADQUARTER Via Don Cesare Scala, 55 37010 Affi, Verona - Italy 37020 Brentino Belluno - Italy F. +39 045 4771028 info@dakota.eu VAT number: IT 07971400960 | Register of Companies of VERONA no. 07971400960 REA: VR-398568