Polyester leaf Usable outdoor as indoor, in posi ve temperature, they are designed for cold rooms, warehouses, workshops of food processing. Isothermal hinge doors They allow the passage of the staff or small material. The stainless steel frame on the 4 sides of the leaf provide a strong resistance to shocks, the polyester facing is resistant to aggressive ambiences. Characteristics Door frame ◆ Aluminium or stainless steel ◆ Thermal break profile. ◆ Insulation in injected polyurethane foam ◆ Thickness : • 60 mm ◆ Facings : • 2 sides in polyester reinforced with glass fibers ◆ Stainless steel frame on 4 sides Standard equipment Rising bu hinges out of polyamide reinforced with glass fibers Outside handle with cylinder-type safety lock to European standards Inside unlocking, punch type Rubber gasket on the 3 sides Adjustable rabbet in the lower part ◆ Left or right hand opening as required, the door is opening to the outside. Clear opening dimensions in mm height

Op ons Exterior or interior stainless steel kick plate height 850 mm Door closer An panic bar HP lock (High Protec on for aggressive or humid ambience) Lock and strike with switch Lock with strike on the edge of the door frame Organiza on chart Rail passage Awning Colour of door leaf according to RAL chart Colour of door frame according to Dagard chart Non contractual document Dagard reserves the right to modify its products without prior notice. Sept2015 Stainless steel Protec on Door closer Lock and strike with switch Lock with strike on the edge of the door frame Rail passage Dagard chart...