Hinged doors GMS

Product catalog summary

Overview: The document describes two installation variants of isothermal hinged doors, Flexi Concept and Easy Concept, specifically designed for supermarkets with positive temperature environments, storage, local conditioning, and workrooms.

Specifications:

Door Frame: Available in injected (Easy Concept) or aluminium/PVC (Flexi Concept) with a thermal break profile.
Leaf: Insulated with injected polyurethane foam, 60 mm thick. Internal and external facings are smooth galvanized steel sheets, coated with polyester lacquer or PET complex, in iceberg white (close to RAL 9010).

Standard Equipment:

Rising butt hinges made of polyamide reinforced with glass fibers.
Outside handle with a cylinder-type safety lock meeting European standards.
Inside unlocking mechanism, punch type.
Rubber gasket clipped into a plastic section on three sides.
Adjustable rabbet in the lower part.

Opening Direction: Doors can open to the left or right as required, always opening to the outside.

Clear Opening Dimensions (in mm):

Height: 2000, 2200
Width: 800, 900, 1000, 1200

Options:

Exterior kick plate 850 mm height in grey PVC (not for exterior use).
Exterior or interior stainless steel kick plate, 850 mm height.
Door closer, anti-panic bar, HP lock for aggressive or humid environments.
Lock and strike with switch, lock with strike on the edge of the door frame.

Installation: Features cutting of full panels, vertical cutting, and H junction with smooth horizontal over door panel. Offers total flexibility on site with pre-mounting in the factory.

Additional Information: The document is non-contractual, and Dagard reserves the right to modify its products without prior notice as of September 2015.

Catalog excerpts

Isothermal hinge doors Characteris cs Door Frame ◆ Injected (Easy Concept) or aluminium/PVC (Flexi Concept) ◆ Thermal break profile. ◆ Insulation in injected polyurethane foam ◆ Thickness : • 60 mm. ◆ Facings : • internal side in smooth galvanised steel sheet, coated with a polyester lacquer 25 μm, iceberg white (close to RAL 9010) • external side in smooth galvanized steel sheet coated with PET 55μ complex (for use outside, choose a polyester 25μ or PVDF lacquer) colour iceberg white (close to RAL 9010) Standard equipment Rising bu hinges out of polyamide reinforced with glass ﬁbers Outside handle with cylinder-type safety lock to European standards Inside unlocking, punch type Rubber gasket clipped into a plas c sec on on the 3 sides Adjustable rabbet in the lower part ◆ Left or right hand opening as required, the door is opening to the outside. Clear opening dimensions in mm height 2000

Open the catalog to page 1

Op ons Exterior kick plate 850 mm height in grey PVC grained aspect (do not use in exterior) Exterior or interior stainless steel kick plate height 850 mm Door closer An panic bar HP lock (High Protec on for aggressive or humid ambience) Lock and strike with switch Lock with strike on the edge of the door frame Organiza on chart Rail passage on Easy Concept Awning Stainless steel Protec on Door closer Non contractual document Dagard reserves the right to modify its products without prior notice. Sept2015 Lock and strike with switch Lock with strike on the edge of the door frame Rail passage Total...

Open the catalog to page 2

All DAGARD catalogs and technical brochures

Archived catalogs

Ultra clean line
2 Pages