*myarchiexpo

Catalogs
DAGARD
Easy Bloc

Easy Bloc

Product catalog summary

Overview: The document provides detailed specifications and features of refrigeration cells, focusing on high performance, competitive pricing, and ease of installation. The cells are designed for both positive and negative temperature applications, with options for customization.

Specifications:

Panels: Available in 60 or 100 mm thickness, made of powder-coated smooth steel with a polyurethane foam core. Thermal conductivity is λ= 0.023 W/m/°C, with Uc values of 0.37 W/m².°C for 60 mm and 0.22 W/m².°C for 100 mm.
Floors: Composed of panels with a lacquered steel lower facing and a plywood upper facing with phenolic resin. Designed for high density and HCFC-free.
Junctions: Integrated rounded angles for easy cleaning, with options for inside and outside corners.

Dimensions:

Inside height options: 185.5 cm with floor, 203 cm without floor.
Inside dimensions range from 143 x 123 cm to 203 x 203 cm, with modular increments of 20 cm.
Outside dimensions are slightly larger to accommodate the structure.

Features:

Easy Bloc: Offers efficient cooling units, reversible doors, and quick installation within 2 hours by two people.
Doors: Isothermal hinged doors with reversible design, key lock, and safety features. Options for heating frames in negative temperatures.
Refrigerating Units: Six models available, three for positive and three for negative temperatures. Installation requires a well-ventilated space.

Recommendations:

Regular maintenance and correct usage are advised to optimize performance and reduce energy consumption.
Cleaning should be done with non-abrasive agents, avoiding large quantities of water in negative temperature rooms to prevent ice formation.

Additional Information: The document is non-contractual and subject to change without notice. Dagard, the manufacturer, has over 60 years of experience in insulation technology.

Catalog excerpts

Refrigeration cells Easy Bloc Complete High Performances Compe ve Strong

Open the catalog to page 1

Easy Bloc “Cooling very easy” Easy Bloc cells have all the advantages of Toundra cells and are equipped with a eﬃcient cooling unit. They are available in 2 heights. Their design allows to install U shape shelvings from dimension 160 cm, and op mise the storage. On the “depth side”, a panel with same width as door frame one, allow permuta on of door loca on on site (according to dimensions, take care of shelvings). The door is totally reversible (right/le ), you select once installing. External face of the door is in PET non scratching and corrosion resistant for long term use. Reduce width panels...

Open the catalog to page 2

Refrigera ng units The refrigera ng units are supported by a special panel made in factory (locking recesses, hole for the run-oﬀ of condensa on water), integra ng in nega ve temperature a pressure compensa on valve. A choice of 6 models : • 3 for posi ve temperature • 3 for nega ve temperature For op mal performance of the unit, we strongly advise that a space of roughly 40 cm be le above the refrigera on unit and/or that this room be mounted in well-ven lated premises. Isothermal hinged doors • 185 x 70 cm reversible for cells of height 185,5 cm 203 x 70 cm reversible for cells of height 203...

Open the catalog to page 3

See the other lines of cold rooms and refrigera on cells Toundra route du stade - 23600 Boussac - France tel. +33 (0) 555 824 000 - [email protected] - www.dagard.com CEB-0001-E/B - Sept2016 - Non-contractual document. Dagard reserves the right to modify its products without prior notice. Documentation offered by your distributor

Open the catalog to page 4

All DAGARD catalogs and technical brochures

Archived catalogs

Ultra clean line
2 Pages