Laying instructions and program overview
64Pages

Laying instructions and program overview Concrete roofing tiles/Clay roof tiles

Content Concrete roofing tiles The complete range of products for each concrete roofing tiles and clay roof tiles can be found on the Internet oron the NELSKAMP data service CD. Product specifications, laying instructions and CAD data are available here. 57 NIBRA® hollow interlocking tile H 14 Manufactured according to DIN/EN 490/491 4 The concrete roofing tile range of colours 62 NIBRA® hollow interlocking tile H 10 6 Concrete roofing tile surfaces 67 Twin trough gutter tile D 15 Ü 6 Regular roof pitch/Roof pitch limits/ Minimum overlap 72 Twin trough gutter tile D 13 7 The new concrete...

The concrete roofing tile range of colours copper brown dark brown slate grey autumn colours moss green brown (ClimaLife) cement-grey (ClimaLife) granite (ClimaLife) Concrete roofing tiles and their colours. Finkenberger pantile CLIMALIFE red brown cement-grey granite LONGLIFE tile red dark brown black moss green blue granite SG = SELF-CLEANING tile red copper brown dark brown slate grey black mid-grey new red bordeaux red granite autumn colours TOP 2000 S tile red dark brown slate grey black new red granite 4 Sigma pantile Kronen pantile Deviations are possible in the colours for reasons...

ClimaLife The new concrete roofing tile surface Concrete roofing tile surfaces TOP 2000 S Self-cleaning With the same colour coating, LONGLIFE concrete roofing tiles have advantages over SG concrete roofing tiles due to the smooth, micro-concrete surface. Trees clean the air. Now roof pantiles* do the same. Colour fastness SG and LONGLIFE coatings have the highest degradation reserves UV and weathering in terms of colour fastness. Abrasion resistance The coating on SG and LONGLIFE concrete roofing tiles is very hard-wearing. These advantages are further optimised by the micro-concrete...

Laying the Finkenberger pantiles. year arra nt Technical data Roofing tile Manufacturer Overall length Minimum overlap Finkenberger pantile Nelskamp (D) ~ 42.0 cm RP > 30° = 7.5 cm RP 22 - 30° = 8.5 cm RP < 22° = 10.0 cm Overall width ~ 34.0 cm Covering length ~ 31.4 - 34.5 cm (depending on roof pitch) Covering width ~ 30.0 cm 2 ~ 10.0 pieces Requirement per m Weight per tile ~ 4.6 kg ~ 46.0 kg Weight per m2 Regular roof pitch 22° The colours that are available can be found on page 4-5. The complete range of moulded bricks and accessories can be found on page 122. Covering widths Gable tile...

Laying the Finkenberger pantiles. Roof lathing in conjunction with ridge flaps (dry ridge) Aeration and ventilation in steep roof Supporting laths: The following min. cross-sections must be used: (rules for roofing, notes on wood and timber materials) Nom. cross-sections Rafter intervals Sizing class of support laths (unit spacing) 30 x 50 mm ≤ 80 cm S 10 40 x 60 mm ≤ 100 cm S 10 1) The vent cross-section at the eaves should be at least 200 cm2/m of eaves. 2) The vent cross-section at the ridge or crest should be at least 0.5‰ of the total corresponding roof area, though at least 50 cm2....

Laying the Sigma pantiles. year arra nt Technical data Roofing tile Manufacturer Overall length Minimum overlap Sigma pantile Nelskamp (D) ~ 42.0 cm RP > 30° = 7.5 cm RP 22 - 30° = 8.5 cm RP < 22° = 10.0 cm Overall width ~ 33.2 cm Covering length ~ 31.4 - 34.5 cm (depending on roof pitch) Covering width ~ 30.0 cm 2 ~ 10.0 pieces Requirement per m Weight per tile ~ 4.3 kg ~ 43.0 kg Weight per m2 Regular roof pitch 22° The colours that are available can be found on page 4-5. The complete range of moulded bricks and accessories can be found on page 122. Covering widths Gable tile for...

Laying the Sigma pantiles. Aeration and ventilation in steep roof Supporting laths: The following min. cross-sections must be used: (rules for roofing, notes on wood and timber materials) Nom. cross-sections Rafter intervals Sizing class of support laths (unit spacing) 30 x 50 mm ≤ 80 cm S 10 40 x 60 mm ≤ 100 cm S 10 1) The vent cross-section at the eaves should be at least 200 cm2/m of eaves. 2) The vent cross-section at the ridge or crest should be at least 0.5‰ of the total corresponding roof area, though at least 50 cm2. (according to DIN 4108-3) Counter-laths: Rec. thickness of...

Laying the Kronen pantile. year arra nt Technical data Roofing tile Manufacturer Overall length Minimum overlap Kronen pantile Nelskamp (D) ~ 42.0 cm RP > 30° = 7.5 cm RP 22 - 30° = 8.5 cm RP < 22° = 10.0 cm Overall width ~ 34.0 cm Covering length ~ 31.4 - 34.5 cm (depending on roof pitch) Covering width ~ 30.0 cm 2 ~ 10.0 pieces Requirement per m Weight per tile ~ 4.7 kg ~ 47.0 kg Weight per m2 Regular roof pitch 22° The colours that are available can be found on page 4-5. The complete range of moulded bricks and accessories can be found on page 122. Covering widths Gable tile for...

Laying the Kronen pantile. Aeration and ventilation in steep roof Supporting laths: The following min. cross-sections must be used: (rules for roofing, notes on wood and timber materials) Nom. cross-sections Rafter intervals Sizing class of support laths (unit spacing) 30 x 50 mm ≤ 80 cm S 10 40 x 60 mm ≤ 100 cm S 10 1) The vent cross-section at the eaves should be at least 200 cm2/m of eaves. 2) The vent cross-section at the ridge or crest should be at least 0.5‰ of the total corresponding roof area, though at least 50 cm2. (according to DIN 4108-3) Counter-laths: Rec. thickness of...

Laying the S pantiles. year arra nt Technical data Roofing tile Manufacturer Overall length Minimum overlap S pantile Nelskamp (D) ~ 42.0 cm RP > 30° = 7.5 cm RP 22 - 30° = 8.5 cm RP < 22° = 10.0 cm Overall width ~ 33.2 cm Covering length ~ 31.4 - 34.5 cm (depending on roof pitch) Covering width ~ 30.0 cm 2 ~ 10.0 pieces Requirement per m Weight per tile ~ 4.7 kg ~ 47.0 kg Weight per m2 Regular roof pitch 22° The colours that are available can be found on page 4-5. The complete range of moulded bricks and accessories can be found on page 122. Covering widths Gable tile for counter-laths 30...