PROPS
4Pages

Construction equipment

PROPS Designed for shoring horizontal formwork, as well as for shoring requirements that may arise on the construction site, provided that load limitations and assembly recommendations are respected. Manufactured with round structural steel tube and painted coating suitable for outdoor use, they are composed of: Square base plates of 120x120 mm, 5 mm thick with reinforcement stampings and a 35mm diameter central hole for the assembly of a formwork system or prop fork head. With 2 additional 9 mm diameter holes. Inner tube with 12 mm diameter drill holes, separated every 100 mm for main...

■ PROP FORK HEAD llll 4-corner fork head consisting of a 6 mm thick base plate and 4 "L" type 30x30 mm profiles as 180 mm long vertical guides with a 7 mm hole at the top for fixing the beams. Designed to bear H20 beams or profiles for formwork. It has 2 positions (see examples). The spigot can be inserted into tubes with a minimum internal diameter of 35 mm. Hot-dip galvanized with a minimum thickness of 75 microns.

Ctra. Santa Bárbara - La Sénia, km 4,6 Tarragona - Spain LIFTING CONCRETE BUCKETS MORTAR SKIPS AND ACCESSORIES CRANE FORKS PLUS GRIPPERS FOLDING TRESTLES WALL BARS AND SQUARES MORTAR SKIPS AND MANHOLE COVERS PLASTER BUCKETS FAÇADE PLATFORMS TOOLS OTHER TOOLS PROPS AND FORMWORK PROPS Product manufacturer: Dacame S.L. · Product design: Dacame, S.L. · Graphic design: Dacame, S.L. · Production: Dacame, S.L. The content of this catalogue in protected in its entirety by copyright. It is completely prohibited to copy the images, texts, illustrations and graphic concepts, totally or partially,...