Corrosion Inhibitor
1Pages

CTS Cement | Advanced Cement Technology Rapid Set® Corrosion Inhibitor Datasheet Increases corrosion resistance Acts as a water repellent Reduces chloride permeability Concrete Pharmacy® Rapid Set® Corrosion Inhibitor Manufacturer: CTS Cement Manufacturing Corp. 11065 Knott Ave., Suite A Cypress, CA 90630 Concrete Pharmacy® Rapid Set® Corrosion Inhibitor: Provides triple protection against corrosion. Directions: Place desired amount of potable water into mixing container. Add half cement product into mixing container and mix with mechanical drill/ mixer. Continue mixing while adding Rapid Set® Corrosion Inhibitor powder to mixing container. Use 1 packet per bag. Add remaining cement product into mixing container. Follow product mixing instructions and maximum water requirements described on the package of the cement product. Mix to a workable, lump-free consistency. CTS 714 Water Absorption Test Method: 37% reduction in absorbed water* *As compared to a sample with no corrosion inhibitors not be liable for any consequential, incidental, or special damages arising directly or indirectly from the use of the material. Packaging: Rapid Set® Corrosion Inhibitor is packaged in a sealed, single-ply polyethylene packet. Caution: DO NOT BREATHE THE DUST. AVOID CONTACT WITH SKIN AND EYES. Use product in well ventilated areas. Exposure to dust from this product may irritate eyes, nose, throat and lungs. Use a NIOSH/MSHA-approved (under 30 Rapid Set® Cement With Corrosion Inhibitor CFR 11) or NIOSH-approved (under 42 CFR 84) respirator. Contact with Rapid Set® Cement dry material or wet mixtures may Portland Cement cause severe chemical burns to skin and eyes. Protect eyes with goggles or safety glasses with side shields. Cover skin with protective clothing. Use chemical-resistant gloves. Do not allow dry material or wet mixture to get inside boots TIME or gloves. Exposure by inhalation over an extended period or repeated periods of time, may result in the Shelf Life: development of pulmonary diseases including One year when stored in cool, dry conditions out silicosis and lung cancer. Seek medical of direct sunlight. treatment if you experience difficulty breathing Limited Warranty: while using this product. In case of skin contact, CTS Cement Manufacturing Corporation immediately wash with soap and water. In case warrants its material to be of good quality, of eye contact, flush immediately and repeatedly and at its sole option, within one year of sale, with large quantities of water. If irritation or burn will replace defective materials or refund the occurs, seek medical treatment. Proposition purchase price thereof and such replacement or 65 Warning: This product contains chemicals refund shall be the limit of CTS’s responsibility. known to the state of California to cause cancer Except for the foregoing, all warranties, express and birth defects or reproductive harm. or implied, including merchantability and fitness for a particular purpose are excluded. CTS shall MORE CORROSION POTENTIAL Use: With Rapid Set® Mortar Mix (55 lb. bag), Cement All (55 lb. bag), Concrete Mix (60 lb. bag), Stucco Mix (50 lb. bag), DOT Repair Mortar (70 lb. bag), and DOT Repair Mix (55 lb. bag), use 1 packet of Rapid Set® Corrosion Inhibitor to increase corrosion resistance to jobsite conditions. Rapid Set® Corrosion Inhibitor may be used in combination with all other products of the Concrete Pharmacy®. ASTM C1202/AASHTO Permeability: 28 days 400-900 coulombs CUMULATIVE CORROSION Product Description: Designed for use with Rapid Set® Cement products and most other packaged hydraulic cements, Rapid Set® Corrosion Inhibitor provides low chloride ion penetration, water repellent, and corrosion resistance for metals embedded in a mortar or concrete, such as metal wire lath or rebar. By using the mortar or concrete as an encapsulated coating over the metal, Rapid Set® Corrosion Inhibitor provides triple protection against corrosion environments.